The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Hydro X Custom Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 08-18-2019, 01:14 PM
skyteam78 skyteam78 is offline
Registered User
skyteam78's PC Specs
 
Join Date: Jun 2019
Posts: 62
POST ID # = 1015017
skyteam78 Reputation: 10
Default Issue with XSPC ECX clear coolant

Hi all,

I have a strange issue with XSPC ECX clear coolant.
Before using the coolant I checked the system for leaks with distilled water.
The loop looked nice and clear.
After that I filled the system again with XSPC ECX coolant (clear) that is compatible with corsair according to specification.
The water immediately turned to be opaque and not clear.
What should I do and what is the reason?

https://i.imgur.com/Q424MKZ.jpg

Thanks

Last edited by skyteam78; 08-18-2019 at 02:00 PM.
Reply With Quote
  #2  
Old 08-18-2019, 05:47 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 9,246
POST ID # = 1015050
c-attack c-attack Reputation: 107
Default

ugh.. Drain it as fast as you can. Buy about 5 gallons of distilled water. You are going to be filling and flushing a lot.

Unfortunately I went through the same thing when I put this Hydro X system together. Crystal clear when I had the test distilled water in there. As soon as I added EK Cryofuel clear it turned into the same thing you see within 30 seconds. All you can do fill it with distilled. Run it for a day or two. Drain it again. Fill with distilled again. Few days later drain again. Repeat. Repeat. In the beginning, you will want to fill and drain as often as you can stand. You can then relax the frequency after several drain. I am now 30+ days since and while the distilled water comes out crystal clear, the opaque residue still remains on the reservoir sides and GPU window.

The alternative is to use one of the chemical "cleaners" sold by various brands. However, you need to be extremely careful with this. Even a trace left behind that then comes in contact with more coolant with its own chemical balance and you get to do the whole thing over again. If you decide to go the chemical route, I would still use distilled water only for a good month after with frequent flushes to make sure it is all gone.
Reply With Quote
  #3  
Old 08-19-2019, 01:21 AM
skyteam78 skyteam78 is offline
Registered User
skyteam78's PC Specs
 
Join Date: Jun 2019
Posts: 62
POST ID # = 1015086
skyteam78 Reputation: 10
Default

Thanks for your fast reply!
I started to drain and wash it with distilled water. I already used about 1 gallon of distilled water. It is much cleaner now but as you said it requires more drain and washing loops.
I wrote to XSPC technical support and sent them some photos. Waiting for their response.
I though to order EK cryofuel instead of XSPC one but you wrote you had the same issue and it is worries me...
Maybe you know what causes it?
Reply With Quote
  #4  
Old 08-19-2019, 04:17 AM
skyteam78 skyteam78 is offline
Registered User
skyteam78's PC Specs
 
Join Date: Jun 2019
Posts: 62
POST ID # = 1015100
skyteam78 Reputation: 10
Default

This answer I received today from XSPC:

There must be some source of contamination in the loop. ECX won’t change to this colour even after years of use."

https://i.imgur.com/pVWIfd3.jpg
Reply With Quote
  #5  
Old 08-19-2019, 07:15 AM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 9,246
POST ID # = 1015118
c-attack c-attack Reputation: 107
Default

I don’t know why it changed. The most likely answer is chemical reaction. This can happen if there are traces of other branded coolants with a different chemical profile or certainly any of those “system prep” rinses that fall into the same category as the chemical cleaners. Every component in my loop was new except the GPU and there certainly wasn’t coolant left over in there. In combination with the hard white line forming in by brand new glass fill beaker before my eyes, I attributed my experience to a bad chemical mix — too much anti-corrosive elements/salts.

Obviously I am biased by my experience, but Googling around brought up more pictures like ours and some suggestion the EK clear is a bit on the milky side anyway. The Corsair coolant can be hard to come by right now, but perhaps Mayhems is a good alternative with a pretty low rate of interaction issues. You have also reminded me I either need to accept my current state and put coolant back in or bite the bullet and use the chemical cleaner to try and get the residue off the reservoir. Unfortunately, I don’t think the top comes off or that would be an easier maneuver.
Reply With Quote
  #6  
Old 08-19-2019, 01:50 PM
skyteam78 skyteam78 is offline
Registered User
skyteam78's PC Specs
 
Join Date: Jun 2019
Posts: 62
POST ID # = 1015163
skyteam78 Reputation: 10
Default

I didn't use any other coolant before and all my components are new.
CPU block, GPU block , Pump/Reservoir, radiators are from Corsair.
Fittings and acrylic tubing - from Bitspower

Corsair support person told me that there are shouldn't be any issues with XL5 coolant.
I ordered one immediately.

From yesterday I flushed the system many times with distilled water and it looks clear again.
Reply With Quote
  #7  
Old 08-20-2019, 08:09 AM
Corsair GregX Corsair GregX is offline
Corsair Employee
 
Join Date: Apr 2019
Posts: 154
POST ID # = 1015231
Corsair GregX Reputation: 10
Default

Rinse with distilled and repeat as often as possible.

Please do let us know how it goes with XL5 coolant.
Reply With Quote
  #8  
Old 08-20-2019, 12:23 PM
skyteam78 skyteam78 is offline
Registered User
skyteam78's PC Specs
 
Join Date: Jun 2019
Posts: 62
POST ID # = 1015252
skyteam78 Reputation: 10
Default

Quote:
Originally Posted by Corsair GregX View Post
Rinse with distilled and repeat as often as possible.

Please do let us know how it goes with XL5 coolant.
Will do. Thanks Greg!
Reply With Quote
  #9  
Old 09-02-2019, 06:36 AM
knacker40 knacker40 is offline
Registered User
 
Join Date: Aug 2019
Posts: 27
POST ID # = 1016489
knacker40 Reputation: 10
Default

having same issue with some Thermaltake clear fluid as well- good job I've a shed load of dionised water to flush with

Edit: is there a compatibilty list of fluids for info?

Last edited by knacker40; 09-02-2019 at 07:35 AM.
Reply With Quote
  #10  
Old 09-28-2019, 01:20 PM
skyteam78 skyteam78 is offline
Registered User
skyteam78's PC Specs
 
Join Date: Jun 2019
Posts: 62
POST ID # = 1019488
skyteam78 Reputation: 10
Default

A few days ago I finally received Corsair XL5 clear coolant.
Today I drained my loop as much as I could.
I added Corsair XL5 coolant and the system is perfectly clear.
Reply With Quote
  #11  
Old 09-28-2019, 06:09 PM
BlaiseP's Avatar
BlaiseP BlaiseP is online now
Registered User
BlaiseP's PC Specs
 
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 181
POST ID # = 1019508
BlaiseP Reputation: 35
Default

Quote:
Originally Posted by knacker40 View Post
having same issue with some Thermaltake clear fluid as well- good job I've a shed load of dionised water to flush with

Edit: is there a compatibilty list of fluids for info?
Yup, in the compatability tab for most Hydro X series products...

CORSAIR Hydro X Series products are compatible with the following coolants:

Coolant Brand Coolant Model Recommendation
CORSAIR XL5 Performance Coolant Preferred
Aquacomputer Double Protect Ultra Compatible
Coolaboratory Liquid Coolant Pro Compatible
EK Cryofuel Compatible
Jingway Iceland X Compatible
Liquid.Cool CFX Opaque Compatible
Mayhems IDC Compatible
Mayhems Pastel Compatible
Mayhems X1 Compatible
Mayhems XT-1 Nuke Compatible
Mayhems XT-1 Compatible
Nanoxia Cooling Fluid Pro Compatible
Nanoxia Cooling Fluid Pro Opaque Compatible
Primochill TRUE. Compatible
Thermaltake C1000 Compatible
XSPC EC6 Compatible
XSPC ECX Compatible
Reply With Quote
  #12  
Old 09-29-2019, 12:23 PM
skyteam78 skyteam78 is offline
Registered User
skyteam78's PC Specs
 
Join Date: Jun 2019
Posts: 62
POST ID # = 1019583
skyteam78 Reputation: 10
Default

Yesterday I found that inside my gpu block there are some residue. It was looking as stucked on the inner side of PMMA cover.
Although I flushed the system many times with distilled water it didn't wash it out.
This is how it looked:
http://imgur.com/a/e3kHtLQ

I decided to disassemble gpu block and clean it.
When i disassembled it, I found some residue inside it both on pmma cover and nickeled plate.
http://imgur.com/a/Sd6jMDx
http://imgur.com/a/cK0tApe

I managed to clean it and after assembly and filling with Corsair XL5 it looks clear again
https://imgur.com/XBdcWsF

Guys, don't use XSPC compatible coolant.

Last edited by skyteam78; 09-29-2019 at 02:20 PM.
Reply With Quote
  #13  
Old 09-30-2019, 05:37 AM
Corsair GregX Corsair GregX is offline
Corsair Employee
 
Join Date: Apr 2019
Posts: 154
POST ID # = 1019684
Corsair GregX Reputation: 10
Default

Thank you for follow up!

Can you please PM me additional information about the previously used XSPC ECX clear coolant, batch #, lot code, any identifier found on the bottle.
Reply With Quote
  #14  
Old 09-30-2019, 07:18 AM
skyteam78 skyteam78 is offline
Registered User
skyteam78's PC Specs
 
Join Date: Jun 2019
Posts: 62
POST ID # = 1019701
skyteam78 Reputation: 10
Default

Quote:
Originally Posted by Corsair GregX View Post
Thank you for follow up!

Can you please PM me additional information about the previously used XSPC ECX clear coolant, batch #, lot code, any identifier found on the bottle.
Hi Greg,
Unfortunately I threw the bottle yesterday.
I bought it from Amazon, Titan Rig and now don't have any details except order details from Amazon.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.