The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > iCUE Software

 
 
Thread Tools Search this Thread Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-25-2019, 04:00 PM
phdibart phdibart is offline
Registered User
phdibart's PC Specs
 
Join Date: Dec 2018
Posts: 8
POST ID # = 1005715
phdibart Reputation: 10
Default LL140 fan won't spin past certain RPM on CoPro

I have a Commander Pro with 3 LL140 and 2 non-RGB, non-PWM fans. RGB port 1 has a Corsair RGB hub plugged in. I control all 5 fans with iCue, and the RGB is working fine on the 3 LL fans. However, one of the LL140s will not spin past 667 RPM, no matter the profile. I have tried the 3 preset profiles, a 100%, and a 1,000 RPM profile. It will only respond to a 0 RPM profile and stop spinning. But as soon as I apply another profile, it spins up to 667 and stays there. I originally had it on port 2 of the CoPro and tried switching it to port 6 with the same symptom. I'm running firmware 3.21.7168 and have tried forcing an update of the firmware, per advice I've seen in another thread. I also have updated iCue to 3.16.56. Any help would be appreciated!
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.