NorseGodTyr Posted December 3, 2020 Share Posted December 3, 2020 Hallo habe ein Problem ;) Hab mir vor ca 2 wochen 6 neue Kühler und Corsair Commander alles angeschloss bzw soweit ich kam :D also all kühler funktionieren ohne Problem nur Die LED von die kühler kann ich nicht anschließen da die 4 pin sind und dort nur rein gibt es irgendein modul womit ich die RGB LED anschließen kann ? Mainboard ist nichts frei -,- Link to comment Share on other sites More sharing options...
c-attack Posted December 3, 2020 Share Posted December 3, 2020 If you bought 6 x LL140 "singles" and not at least 1 multi-pack (2x140), then you are missing both the Lighting Node Pro (software control) and the RGB Lighting Hub that provides power. Both are essential. If you can, send 2 of the LL140s back and get one of the multi-packs. Otherwise you will have to source both of those components and it can be difficult to obtain all the pieces. Link to comment Share on other sites More sharing options...
NorseGodTyr Posted December 3, 2020 Author Share Posted December 3, 2020 If you bought 6 x LL140 "singles" and not at least 1 multi-pack (2x140), then you are missing both the Lighting Node Pro (software control) and the RGB Lighting Hub that provides power. Both are essential. If you can, send 2 of the LL140s back and get one of the multi-packs. Otherwise you will have to source both of those components and it can be difficult to obtain all the pieces. found a way i was buyed x2 RGBpx Splitty4 so i was can use all 6 LL140 :) https://shop.aquacomputer.de/product_info.php?products_id=3766 Link to comment Share on other sites More sharing options...
c-attack Posted December 3, 2020 Share Posted December 3, 2020 I haven't seen that don't know how it works. It looks like it might be offloading the control to the MB style D-RGB header. Don't know if that can handle the current from 4xLL fans (~2.4A max at full white). I don't see any external power for it. Link to comment Share on other sites More sharing options...
Recommended Posts