Jump to content
Corsair Community

Corsair Void Wireless Problems Found


Siman

Recommended Posts

OK... So I decided to leap into my Corsair VOID Wireless graphite to see what the issues Im having and everyone else is having...

 

What I found was a bit appalling from an audio person's point of view... The soldering points are botched mostly signs of under heated contact points. They also are using a piece of tape to hold the audio cables in place needless to say not a good thing. A majority of the poping problems could be fixed with the tape issue alone. Another issue I found is the battery is held in the far side of the head set and the cables that carry audio to the other headset ride in the same cable as the power... Back onto the cables, again... they are very poorly shielded and undersized. For a headset that cost this much Im very, very displeased. I suggest people that want a good headset look elsewhere this is a very poor product, also something I did not expect coming from corsair.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...