Exerqtor Posted April 3, 2019 Share Posted April 3, 2019 (edited) Just updated to iCUE 3.14.104 and after that non of the G-key remappings work. If i assign a function/program to the G-key they work. But i i for instance Try to remap G6 to "9" nothing happens. Anyone else experiencing this? Using a K95 Platinum btw. Edited April 3, 2019 by Exerqtor Link to comment Share on other sites More sharing options...
c-attack Posted April 3, 2019 Share Posted April 3, 2019 Go into your apps setting in Windows, right click and try a repair installation of iCUE. This happens every once in a while to someone. I am using them ON 3.14.104 on a K95P without issue. Link to comment Share on other sites More sharing options...
Exerqtor Posted April 4, 2019 Author Share Posted April 4, 2019 Rightclick ain't an option in Win10 in the Apps list only leftclick and the options to "Change" or "Uninstall". Took "Change" and then choose repair inside the iCUE installer, now it all works. Thanks for the tip mate! Link to comment Share on other sites More sharing options...
Whipsngrams Posted April 5, 2019 Share Posted April 5, 2019 For those of you with issues relating to the "new" iCUE software: Delete all profiles/macros etc. that were created. Make sure your BIOS is switched to 1 (default) if your keyboard comes equip. Uninstall the software(iCUE), Go to Device Manager uninstall your Keyboard. SHUT DOWN Do Not Restart computer shut down completely, unplug keyboard's and mouse's USB from PC while its shut down. When you Fire back up the PC, immediately insert USB's back. Download and use the Original CUE (Corsair Utility Engine) software. Make sure CUE isn't starting with windows, you can uncheck that in the software's settings. This would work with all keyboards/mouse etc.. Make sure you check for updates and firmware update, you can locate everything in the Corsair Utility Engine software. Link to comment Share on other sites More sharing options...
Recommended Posts