jb60606 Posted May 26, 2014 Share Posted May 26, 2014 My case fans don't appear in CorsairLink. Are they supposed to? I ask because I can't really tell if they're increasing in RPM or not when I run CPU benchmarks (though, the Corsair h100i fans definitely do speed up). I have 4x Noctua NF-A14 140mm 4-pin PWM fans in my case. Prior to picking up my h100i this afternoon, I used Asus Thermal Radar, which gave complete control over all fans in the case but uninstalled it to avoid any potential conflicts with CorsairLink. Thanks in advance. Link to comment Share on other sites More sharing options...
Toasted Posted May 26, 2014 Share Posted May 26, 2014 Are the fans plugged into the Cooling Node? If not, the fans won't be seen in the LINK software. Link to comment Share on other sites More sharing options...
jb60606 Posted May 26, 2014 Author Share Posted May 26, 2014 So, if I want to control those fans I'll need to purchase the CorsairLink cooling and lighting node? Thanks Link to comment Share on other sites More sharing options...
wytnyt Posted May 26, 2014 Share Posted May 26, 2014 So, if I want to control those fans I'll need to purchase the CorsairLink cooling and lighting node? Thanks yes,link software is for the link commander/hydro and isnt a fan stand alone software unfortunately tho,the link is currently unavailable... Link to comment Share on other sites More sharing options...
jb60606 Posted May 27, 2014 Author Share Posted May 27, 2014 thanks. I guess they may be coming out with a new version soon? Or at least, that's what I've been reading on a couple of forums. That's unfortunate, I'd really like to get my case fans in sync with the h100i soon. One more question - Do you connect the h100i directly to the Link kit? I only have two USB headers on my mobo (one needed by the chassis), and I'm curious as to where I'd connect the h100i if the Link kit needs its own USB header. Thanks Link to comment Share on other sites More sharing options...
Toasted Posted May 27, 2014 Share Posted May 27, 2014 Update the H100i to FW 1.0.7 via the USB cable then you can plug it into the LINK Commander unit. Link to comment Share on other sites More sharing options...
jb60606 Posted May 27, 2014 Author Share Posted May 27, 2014 Update the H100i to FW 1.0.7 via the USB cable then you can plug it into the LINK Commander unit. thanks. In that case, I hope the next model has ports for more fans Link to comment Share on other sites More sharing options...
robandcathy Posted June 4, 2014 Share Posted June 4, 2014 You can add more fan controllers. Im pretty sure Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.