sauravthakur12 Posted July 3, 2019 Share Posted July 3, 2019 I did provide individual connection to PSU to sata power but it did not lit the RGB of pump header, so my new theory is it has to do with 3.3volts point in a sata power(5 wires including orange) to 6pin and which I am not able to find anywhere online or at shops, I am curious if people got it working with traditional 4 wire sata power from PSU, what am I missing here? Btw my chipset is msi z370A pro if that has to do with anything, I can see the AIO in my Icue but color changes arent working for pump(its not lighting to begin with) btw The cooling shows that its working properly. Link to comment Share on other sites More sharing options...
DevBiker Posted July 3, 2019 Share Posted July 3, 2019 The lighting actually uses the 5V rail, not the 3.3V rail. I'm fairly certain that the cooler doesn't use the 3.3V rail at all - just the 12V and 5V rail. Which means that it'll work with a straight SATA connection or even one with a molex to sata adapter (not recommended, btw). Do color changes work for the fans? Is it just the pump that's out? Link to comment Share on other sites More sharing options...
sauravthakur12 Posted July 4, 2019 Author Share Posted July 4, 2019 Color changes for fans is working but no lighting on pump. Now I think product could be defective btw do you have any amazon link to the 6pin sata power cable, that will be helpful, my molex is not able to power it up maybe. Link to comment Share on other sites More sharing options...
kidroc Posted July 4, 2019 Share Posted July 4, 2019 It's a issue with some the early ver of this kit.. i had my first one do the same as yours after a restart no more pump rgb ever again...Good news is my second has been very good to me. Link to comment Share on other sites More sharing options...
Recommended Posts