The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Hydro X Custom Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 11-05-2019, 03:34 AM
Dobre85 Dobre85 is offline
Registered User
 
Join Date: Sep 2019
Posts: 7
POST ID # = 1023071
Dobre85 Reputation: 10
Default Don´t use Colored Corsair Coolant!

Warning! Corsair Hydro X Blue Coolant rendered my GPU Block useless after 3 Weeks of use. Support said i should clean it up with Toothbrush and soapy water but its not working. No RMA for me! Here is some Video

Here are some pictures where you can see that the left side of the cooler is cludy(there is no flow through) and the right side is clear.

https://drive.google.com/file/d/1g-m...ew?usp=sharing
https://drive.google.com/file/d/1en1...ew?usp=sharing
https://drive.google.com/file/d/1Uor...ew?usp=sharing

Last edited by Dobre85; 11-05-2019 at 04:16 AM.
Reply With Quote
  #2  
Old 11-05-2019, 10:08 AM
Nazgul Nazgul is offline
Registered User
Nazgul's PC Specs
 
Join Date: Aug 2019
Posts: 53
POST ID # = 1023103
Nazgul Reputation: 7
Default

My blue coolant is as good as new.........temps are ridiculously low.

Are all your fittings the same color or you have different ones?
Attached Images
File Type: png Idle Temps.png (63.0 KB, 14 views)
File Type: jpg PRL.JPG (2.34 MB, 20 views)

Last edited by Nazgul; 11-06-2019 at 08:53 AM.
Reply With Quote
  #3  
Old 11-05-2019, 02:38 PM
tiborrr tiborrr is offline
Registered User
tiborrr's PC Specs
 
Join Date: Sep 2019
Posts: 26
POST ID # = 1023135
tiborrr Reputation: 10
Default

If there would be no flow, the water would start boiling eventually in the fin stack and your computer would malfunction.

The reason why you see deposits on one side only is due to the fact that cooling fin stack acts as a filter, thus bigger particles are caught on the inlet side of the water block channel.

What you see is most likely dirt deposit build-up, which has absorbed blue dye from your coolant. If you would have, say, red coolant, you would see red deposits. One you dry it up, it coagulates and becomes crystalline like.

Why am I so certain? It's because if this deposits are not soluble in water, it hasn't come from the coolant. The coolant has merely contributed the dye part.

Best way to clean these kinds of deposits is to use household ultrasonic cleaner with distilled water. Turn the heat up if it has that function (I'm sure it does), run it for 30-60minutes and it will as good as new.

I use a small 2-litre $60 USD ultrasonic cleaner at home for cleaning all kinds of small metallic parts, from silverware to jewerly, and it works like a charm.
Reply With Quote
  #4  
Old 11-06-2019, 02:16 AM
Zone55555 Zone55555 is offline
HydroX Success Story
Zone55555's PC Specs
 
Join Date: May 2010
Location: Ontario, Canada
Posts: 100
POST ID # = 1023190
Zone55555 Reputation: 10
Default

Red doing fine here. Have flushed and filled a couple times to expand my loop and inspections each time came back without issues.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.