The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Corsair Link

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 04-10-2015, 11:36 AM
gingersea gingersea is offline
Registered User
gingersea's PC Specs
 
Join Date: Apr 2015
Posts: 1
POST ID # = 771852
gingersea Reputation: 10
Default Intel RAID Temps

Just got an AX860i but the Corsair link software does not see drive info thru the intel RAID driver. Any plans on updating this or is there a way to see the SMART data through the Intel RAID?
Reply With Quote


1 members found this post helpful.
  #2  
Old 04-10-2015, 12:53 PM
red-ray red-ray is offline
Banned
red-ray's PC Specs
 
Join Date: May 2014
Location: England (GMT+1)
Posts: 7,152
POST ID # = 771869
red-ray Reputation: 81
Default

I asked the same, see http://forum.corsair.com/forums/showthread.php?t=135091

The code to do this is simple enough and all of AIDA64, HWiNFO and SIV support this.

Last edited by red-ray; 06-10-2015 at 02:39 AM.
Reply With Quote


  #3  
Old 04-10-2015, 03:58 PM
William1 William1 is offline
Registered User
William1's PC Specs
 
Join Date: Nov 2014
Location: Virginia
Posts: 82
POST ID # = 771927
William1 Reputation: 11
Default

Intel's Rapid Storage Technology application can give you RAID info and management.
Reply With Quote


  #4  
Old 06-10-2015, 02:36 AM
red-ray red-ray is offline
Banned
red-ray's PC Specs
 
Join Date: May 2014
Location: England (GMT+1)
Posts: 7,152
POST ID # = 783967
red-ray Reputation: 81
Default

It's now been 6 months and 3.1.5570 still fails to report Intel RAID Temps. When is this likely to be addressed please?

Last edited by red-ray; 06-10-2015 at 02:41 AM.
Reply With Quote


  #5  
Old 06-10-2015, 12:11 PM
Corsair Dustin's Avatar
Corsair Dustin Corsair Dustin is offline
Corsair Employee
Corsair Dustin's PC Specs
 
Join Date: Oct 2013
Posts: 4,100
POST ID # = 784049
Corsair Dustin Reputation: 41
Default

Given the other issues we have to work through, the fact that temp reporting under RAID is a little trickier, and that this doesn't severely inhibit usability, it's going to be very low priority and not likely to get addressed until CL4 at the earliest.
__________________
Corsair DIY & Gaming Systems Architect
Product Manager for Cooling


Please do not send private messages requesting tech support or trouble shooting. You can create a thread and let the solution to your issue be visible to everyone, or alternatively, work directly with tech support by contacting them here.
Reply With Quote


  #6  
Old 06-10-2015, 01:17 PM
CircuitWizardry CircuitWizardry is offline
Registered User
 
Join Date: Jun 2014
Posts: 107
POST ID # = 784065
CircuitWizardry Reputation: 21
Default

Quote:
Originally Posted by Corsair Dustin View Post
Given the other issues we have to work through, the fact that temp reporting under RAID is a little trickier, and that this doesn't severely inhibit usability, it's going to be very low priority and not likely to get addressed until CL4 at the earliest.
Consider that on 2/11/15 we were told by Corsair's representative:

Quote:
Originally Posted by COOL GUY View Post
Updated 2/11/15

The new 3.1.xxxx is still under test and some issues were found with the fixes for the firmware on H80i and H100i. The new firmware is going to be pulled along with the new firmware update bootloader for the 3.1.xxxx release at first. It is still being worked on but will be a couple weeks behind as we have to start qualification over again after updating the firmware.
Now, 4 months later, Corsair has released a new version, which fails to address the issues they promised to address, and broken the promise not to release software prior to fixing these issues.

Quote:
Originally Posted by COOL GUY View Post
Updated 2/11/15

What came out of the bug tracking meeting was that several of the issues were not fully resolved. Another drop of the software went into test today meant to resolve them. If the software has known critical issue's it will not leave the building, now matter how badly an update is needed.
So the only take away possible from all this, is that Corsair will do what makes them money in the future. Support of that product you purchased, is not of any priority for Corsair.

I figure we'll get a fixed version of Corsair Link, or CL4 when Corsair Dustin becomes known as the Happy Guy of tech support, rather than the Grumpiest!

Last edited by CircuitWizardry; 06-10-2015 at 07:44 PM. Reason: Fixed spelling error.
Reply With Quote


1 members found this post helpful.
  #7  
Old 06-11-2015, 03:20 AM
red-ray red-ray is offline
Banned
red-ray's PC Specs
 
Join Date: May 2014
Location: England (GMT+1)
Posts: 7,152
POST ID # = 784178
red-ray Reputation: 81
Question What is the URL that specifies what CL V4 willl address and projected release date?

Quote:
Originally Posted by Corsair Dustin View Post
Given the other issues we have to work through, the fact that temp reporting under RAID is a little trickier, and that this doesn't severely inhibit usability, it's going to be very low priority and not likely to get addressed until CL4 at the earliest.
Having implemented SMART (Temperature) reporting for Intel ICH/PCH CSMI RAID drives I know that it is not tricky at all.

When you say it may be in V4 this is pointless as you failed to specify when V4 is scheduled for release. I feel Corsair would do well to read http://www.quickanddirtytips.com/rel...itments-part-1 and http://www.quickanddirtytips.com/rel...itments-part-2.

Last edited by red-ray; 06-11-2015 at 03:23 AM.
Reply With Quote


1 members found this post helpful.
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.