DemonRoxas Posted March 27, 2018 Share Posted March 27, 2018 With LINK, if I choose a predefined effect (for example "Color Wave") for all 4 strips, each strip acts as one and has its own wave going off at the same time (and I can control each strip's wave direction) . With iCUE, if I choose this effect for all 4 strips, the wave goes through all 4 of them as if they are sequential. I can choose "left" or "right" as the direction for the whole flow, but I can't choose that for each individual strip anymore. I can "uncouple" the wave into 4 seperate waves by having 4 layers of the custom "Wave" effect (each strip gets its own layer), but I can't change the direction of the custom "Wave". If I create 4 layers of predefined "Color Wave" (one for each strip), they behave chaotically and don't sync up at all. Some of my old LINK profiles need synced seperate waves with individual directions to achieve their visual effect. With iCUE, this is impossible. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted March 27, 2018 Corsair Employee Share Posted March 27, 2018 If you assign each strip as a Color Wave layer (4 layers) and then restart iCUE, each layer will start simultaneously and you'll get the same effect. Link to comment Share on other sites More sharing options...
Zotty Posted March 27, 2018 Share Posted March 27, 2018 restart iCUE, each layer will start simultaneously and you'll get the same effect. Confirmed... or just switch to another profile and back again. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted March 27, 2018 Corsair Employee Share Posted March 27, 2018 Thanks for confirming! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.