guschen802 Posted May 11, 2018 Share Posted May 11, 2018 I just build a PC since a long time ago, last time is 2008 and I did not care about too much during that time. So I am excited to build a new PC aging, and I got the Corsair 460x RGB It is beautiful but one thing annoying me is the LED, sometimes I need it off, I think people already mentioned about this but I hope there will be a on/off button on the controller in the future. Another thing is the SP120 fan does not have PWM so it is running at full speed. Going back to the question, after doing some research, I know that Corsair Link and CLCP can achieve what I want. However I am not always running Windows, sometimes I worked on other OS which can not run LINK all the time. So I want to confirm some thing. 1. If I set the fan to RGB 000 to close the LED, will it keep off if I close the LINK? 2. Will the fan rpm adjust according to motherboard's temp sensor without running LINK?(I guess not based what I seem on the forum) 3. IF 2 is not possible, with the optional temp sensor come with CLCP, will it work without LINK? I want to be sure it work before I buy the CLCP Thanks in advanced! Link to comment Share on other sites More sharing options...
DevBiker Posted May 13, 2018 Share Posted May 13, 2018 IF you are using Link (not iCue): 1) For the SP-RGB fans, yes. 2) NO. The only way this will work is if the fan speed is based on one of the CoPro's temperature sensors 3) Yes. Link to comment Share on other sites More sharing options...
guschen802 Posted June 3, 2018 Author Share Posted June 3, 2018 IF you are using Link (not iCue): 1) For the SP-RGB fans, yes. 2) NO. The only way this will work is if the fan speed is based on one of the CoPro's temperature sensors 3) Yes. Thanks! Sorry for not seeing this until now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.