The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Corsair Link

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 11-30-2014, 07:08 AM
chrisdash chrisdash is offline
Registered User
chrisdash's PC Specs
 
Join Date: Oct 2014
Posts: 13
POST ID # = 744346
chrisdash Reputation: 10
Default Corsair Link Dongle LED switches between green and red

Hello,
recently I got a AX1200i power supply. The PSU works fine but something seems to be wrong with the Corsair Link software. I get readings of 0°C and 0 Watts Power in/out most of the time. The Dongle LED is red most of the time. Occasionally the LED switches to green for a fraction of a second. I can also see readings pop up in the software when that happens. But it quickly goes back to red. I've already tried if maybe one of the cables or connectors has a problem, but I don't think so. The behaviour didn't change when I pushed the connectors.
Using Corsair Link Version 2.7.5361.
I would be thankful for any advice on how to get this working properly.
Regards
Christian
Reply With Quote


  #2  
Old 11-30-2014, 09:10 AM
Specter's Avatar
Specter Specter is offline
Registered User
Specter's PC Specs
 
Join Date: Feb 2013
Posts: 376
POST ID # = 744354
Specter Reputation: 22
Default

uninstall Corsair Link Version 2.7.5361 and install version 2.4.5110. See if the issue continues.
Reply With Quote


  #3  
Old 11-30-2014, 11:19 AM
chrisdash chrisdash is offline
Registered User
chrisdash's PC Specs
 
Join Date: Oct 2014
Posts: 13
POST ID # = 744370
chrisdash Reputation: 10
Default Error during Uninstall

Hi Specter,
thanks for the help. I got an error during uninstall (despite having closed the application first), is this something to worry about:



I will continue as suggested now...
Reply With Quote


  #4  
Old 11-30-2014, 11:28 AM
red-ray red-ray is offline
Banned
red-ray's PC Specs
 
Join Date: May 2014
Location: England (GMT+1)
Posts: 7,152
POST ID # = 744374
red-ray Reputation: 81
Default

Corsair Link Version 2.7.5361 reports my AX1500i OK so I am wondering if you have Windows 8.1 and just need to set EnhancedPowerManagementEnabled to zero. It would be good if you posted your system information.
What do the [USB Bus] and [Link Devices] panels of my SIV (http://rh-software.com/) utility report? If you exit CL before running SIV then [Link Status] may report your AX1200i.
Reply With Quote


  #5  
Old 11-30-2014, 11:33 AM
chrisdash chrisdash is offline
Registered User
chrisdash's PC Specs
 
Join Date: Oct 2014
Posts: 13
POST ID # = 744375
chrisdash Reputation: 10
Default

Works like a charm now. Thanks a lot, Specter!


Side note: I did manually uninstall the Dongle Driver through windows control panel -> programs -> remove program after the uninstaller for Corsair Link Software had crashed. Then I rebooted. Then I installed version 2.4.5110 as Specter suggested, which you can find in this thread (scroll down!). Hope it helps someone else! I know a bunch of people in Germany bought AX1200i's last week, so, ...

Thanks, bye
Christian
Reply With Quote


Reply

Tags
dongle, green, led, link, red

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.