alejandro Posted March 20, 2014 Share Posted March 20, 2014 Hi, i bought an H100i 6 months ago aprox, and had no problems with it, but in the last days, my CPu is getting very hot, im getting ~95C while gaiming/compiling and just cant figure whats going on. I tryed to change some settings at CorsaireLink software and apparently my H100i pump fan is runing at 100% (4300 rpm) and if i try to lower/change the speed nothing happends. The fans are not particullarly loud actually.. Link to comment Share on other sites More sharing options...
enderep12 Posted March 20, 2014 Share Posted March 20, 2014 Sounds almost exactly like the problem I had (see my thread here: http://forum.corsair.com/v3/showthread.php?t=127379 ) You might give it a shot and try remounting with a different thermal paste (I used Noctua NT-H1)... That fixed it for me! Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 20, 2014 Share Posted March 20, 2014 Pump speed is supposed to be around 2200rpm. If it's running at 4300rpm there is something wrong with your unit. Link to comment Share on other sites More sharing options...
Ripshod Posted March 20, 2014 Share Posted March 20, 2014 ^^ Either that or if you're using corsair link software someone has configured the pump divider to 'One', when it should be 'Two'. Also the pump speed is not controllable. Looks like you may have to reseat the pump unit. Link to comment Share on other sites More sharing options...
alejandro Posted March 20, 2014 Author Share Posted March 20, 2014 Sorry maybe i explained myself wrong, when im saying my pump is 4300 rpm im talking about the pump fan, the pump rpm are at 2200. Im not realy sure what's the pump fan , but in corsairelink when i click on H100i Pump, i can switch betwien the option "pump" and the option "fan". The fan is stock at 4300 rpm. @enderep Ill try reasambling, and changing the thermo gum, i allready cleaned the interior of the case/fans and components. Link to comment Share on other sites More sharing options...
Torvi Posted March 21, 2014 Share Posted March 21, 2014 i think the thermal compound might be the case, i advice taking arctic mx4 thermal compound, really good one :) Link to comment Share on other sites More sharing options...
alejandro Posted March 26, 2014 Author Share Posted March 26, 2014 I allready changed the thermal compound and reinstalled the H100i and no luck :( my temps are near 100 C when my cpu is at 80% load.. :( any ideas? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.