Sazyk Posted September 14, 2013 Share Posted September 14, 2013 Hello, i bought the H100i 4 months ago and everything seemed to be fine; but 2 weeks ago the pump started making some noise, so i decided to update firmware from 1.0.5 to 1.0.7 and it disappeared. But the problem now is that i can set the led color to almost every color i want, red, green, blue, etc. But the white color is like a very very light blue. In my case i setted the led color to red using CorsairLinkV2 2.4.4948 but after reboot the color chages to a light pink. If you can tell what could i do, i'd appreciate it. NOTE: Sorry if i wrote something wrong, but Spanish is my language (i'm from Argentina) Link to comment Share on other sites More sharing options...
Sazyk Posted September 16, 2013 Author Share Posted September 16, 2013 So? Can anyone help me? =/ Link to comment Share on other sites More sharing options...
telepati Posted September 16, 2013 Share Posted September 16, 2013 Mein is always Red I cant never change any color :) They said me a bug in this version. Really long time past and Corsair never fix this problem. I think they are sleeping.. Link to comment Share on other sites More sharing options...
RazorJah Posted January 8, 2014 Share Posted January 8, 2014 update firmware from 1.0.5 to 1.0.7 and it disappeared. i setted the led color to red using CorsairLinkV2 2.4.4948 but after reboot the color chages to a light pink. Hi, I have read several thread on this forum, and i see that a lot of people, including me, have the same issue. Corsair, can you, please, release a new firmwar in order to correct this issue on a product that cost more than US$100 ??? Link to comment Share on other sites More sharing options...
RazorJah Posted January 18, 2014 Share Posted January 18, 2014 Hi, I have read several thread on this forum, and i see that a lot of people, including me, have the same issue. Corsair, can you, please, release a new firmwar in order to correct this issue on a product that cost more than US$100 ??? Autoquote for up. Please, centralize led issues here to improve visibility to Corsair. Link to comment Share on other sites More sharing options...
kwisatzhaderach Posted January 19, 2014 Share Posted January 19, 2014 It's a bug in the new firmware. With my mobo, a restart does not change the LED color, but a cold boot will. If I just restart Windows, no change, but if I shut down, then the next time I restart, it changes. What its doing is turning all the LED's on at start up. If you open link, and move the sliders to the top, and then move them back down, the color resets itself. Link to comment Share on other sites More sharing options...
Rockeer Posted January 21, 2014 Share Posted January 21, 2014 Same thing here, a few months ago I installed firmware 1.07 and this is when the error started happening, I rolled back to 1.05 and it was gone, now that the new CL for 8.1 is out, downloading it and installing automatically updated my firmware back to 1.07 and now I have the same problem. And there is no longer a button to update firmware inside the software... Pissing the hell out of me. Link to comment Share on other sites More sharing options...
3Paw Posted March 27, 2014 Share Posted March 27, 2014 It's a bug in the new firmware. With my mobo, a restart does not change the LED color, but a cold boot will. If I just restart Windows, no change, but if I shut down, then the next time I restart, it changes. What its doing is turning all the LED's on at start up. If you open link, and move the sliders to the top, and then move them back down, the color resets itself. Bump. I have the exact same issue. :(: Link to comment Share on other sites More sharing options...
Rubnik Posted March 28, 2014 Share Posted March 28, 2014 Same thing here, a few months ago I installed firmware 1.07 and this is when the error started happening, I rolled back to 1.05 and it was gone, now that the new CL for 8.1 is out, downloading it and installing automatically updated my firmware back to 1.07 and now I have the same problem. And there is no longer a button to update firmware inside the software... Pissing the hell out of me. Previous versions of corsair link,(before 2.5.5145) still have the update firmware button.Just download the version in the H100i downloads page and the 1.05fw from the forums. Link to comment Share on other sites More sharing options...
Ripshod Posted March 28, 2014 Share Posted March 28, 2014 Like Razor I've been studying. I've gone back to the 1.0.5 firmware and v2.4.5110, as this combination still remembers profiles and led colours through a cold reboot ;) Link to comment Share on other sites More sharing options...
NTCosa Posted June 20, 2014 Share Posted June 20, 2014 Having this issue after most recent firmware update from Corsair.. please fix this! Link to comment Share on other sites More sharing options...
ady86 Posted July 5, 2014 Share Posted July 5, 2014 Hello, i bought the H100i 4 months ago and everything seemed to be fine; but 2 weeks ago the pump started making some noise, so i decided to update firmware from 1.0.5 to 1.0.7 and it disappeared. But the problem now is that i can set the led color to almost every color i want, red, green, blue, etc. But the white color is like a very very light blue. In my case i setted the led color to red using CorsairLinkV2 2.4.4948 but after reboot the color chages to a light pink. If you can tell what could i do, i'd appreciate it. NOTE: Sorry if i wrote something wrong, but Spanish is my language (i'm from Argentina) exactly the same walk, too. I have version 2.6.5214 on windows 7 ultimate x 64 please fix the problem (money to ask on this product know ... but the value of software can not do?) Link to comment Share on other sites More sharing options...
ady86 Posted July 8, 2014 Share Posted July 8, 2014 HELLLLLLLLLLLLLLLLLLLLOOOOOOOOOOOOOO ... please FIX software . CORSAIR Link to comment Share on other sites More sharing options...
Raven Kro Posted July 9, 2014 Share Posted July 9, 2014 hello I am new here and i have the same problem with the LED not keeping it's color on restart... but if you never set the value of a color to 0 it stays.. at least for me it's been working but since you cant really pick the color for temp cycles it doesn't work all the time if you want red R 255 G 1 or 2 ( never 0 ) B 1 or 2 ( never 0 ) same for solid green and blue hope this helps... like i said it works for me and i don't know anyone else that has an I version corsair water cooler to test it. by the way i am running windows 7 64bit Link to comment Share on other sites More sharing options...
ady86 Posted July 9, 2014 Share Posted July 9, 2014 hello I am new here and i have the same problem with the LED not keeping it's color on restart... but if you never set the value of a color to 0 it stays.. at least for me it's been working but since you cant really pick the color for temp cycles it doesn't work all the time if you want red R 255 G 1 or 2 ( never 0 ) B 1 or 2 ( never 0 ) same for solid green and blue hope this helps... like i said it works for me and i don't know anyone else that has an I version corsair water cooler to test it. by the way i am running windows 7 64bit not work for me :(:mad: Link to comment Share on other sites More sharing options...
orte7e Posted July 15, 2014 Share Posted July 15, 2014 Tried the red up to 255,Green down to 2,Blue down to 2 and it worked. Link to comment Share on other sites More sharing options...
ady86 Posted July 18, 2014 Share Posted July 18, 2014 ok, I tried for the second time ... and yes to function lastly of detained ... choose what color you want .... but never sit on 0 (none of the colors chosen) will attach a picture to see exactly the point. I chose orange for my profile to " silent " ...for gaming chose RED devil :D Link to comment Share on other sites More sharing options...
Bradforth Posted July 19, 2014 Share Posted July 19, 2014 I will give this a go. Thanks guys love this forum for all things corsair ^.^ Link to comment Share on other sites More sharing options...
Jalhadin Posted August 22, 2014 Share Posted August 22, 2014 Having the same issue. I can keep the pump color red..ish, by setting green and blue to 2. But this washes the color out next to the true red leds in my case. And when I try to tweak anything, the light is pink next time I turn on my tower. I have windows 8.1 so I have to use the latest firmware or the utility doesn't work at all. Link to comment Share on other sites More sharing options...
Jalhadin Posted August 22, 2014 Share Posted August 22, 2014 Well, just found this; Known Issues LED saved settings not persistent after restart if two of the colors are set to 0 (255, 0,0) New firmware revision to address issues will be available in a 2.8 release. So I guess a response isn't necessary. On that note, hurry up and release 2.8! Link to comment Share on other sites More sharing options...
sblantipodi Posted October 1, 2014 Share Posted October 1, 2014 It's a bug in the new firmware. With my mobo, a restart does not change the LED color, but a cold boot will. If I just restart Windows, no change, but if I shut down, then the next time I restart, it changes. What its doing is turning all the LED's on at start up. If you open link, and move the sliders to the top, and then move them back down, the color resets itself. I have the same identical problem with H80i, Windows 8.1 and latest corsair link software. Is there a fix to this problem? Link to comment Share on other sites More sharing options...
sblantipodi Posted October 1, 2014 Share Posted October 1, 2014 Well, just found this; Known Issues LED saved settings not persistent after restart if two of the colors are set to 0 (255, 0,0) New firmware revision to address issues will be available in a 2.8 release. So I guess a response isn't necessary. On that note, hurry up and release 2.8! does this means that if I use (255, 1,1) instead of (255, 0,0) it will fix the problem? Link to comment Share on other sites More sharing options...
Thanagor Posted October 1, 2014 Share Posted October 1, 2014 I got the same problem, i have 255 Red and 0-0 green and blue and when i reboot, it becomes pink :/ i ll try to put also 1-1 green and blue and see ;) Link to comment Share on other sites More sharing options...
sblantipodi Posted October 1, 2014 Share Posted October 1, 2014 I got the same problem, i have 255 Red and 0-0 green and blue and when i reboot, it becomes pink :/ i ll try to put also 1-1 green and blue and see ;) the problem happen with all colors, also with fixed color without temperature change. Link to comment Share on other sites More sharing options...
sblantipodi Posted October 2, 2014 Share Posted October 2, 2014 I asked for an RMA for the led problem, if the new unit will have the same problem I want my money back from corsair since they sold a product that is not able to do what it must do. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.