Jerri7 Posted July 4, 2020 Share Posted July 4, 2020 :hihi: Hi all :hihi: i have a big problem. I was manually reset ssd with this two holes and after that green light led change to red light. What i can do now? :brick: attached some pictures ssd info: MX500 M.2 2280 500GB SATAA 6Gb/s SED 3.3V 1.7A MDL: CT500MX500SSD4 PN: CT500MX500SSD4 SN: 1834E14DFC00 PSID: 2002DA22-428F-0115-7E71-B9A528311290 Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted September 3, 2020 Corsair Employee Share Posted September 3, 2020 :hihi: Hi all :hihi: i have a big problem. I was manually reset ssd with this two holes and after that green light led change to red light. What i can do now? :brick: attached some pictures ssd info: MX500 M.2 2280 500GB SATAA 6Gb/s SED 3.3V 1.7A MDL: CT500MX500SSD4 PN: CT500MX500SSD4 SN: 1834E14DFC00 PSID: 2002DA22-428F-0115-7E71-B9A528311290 That's a drive from another vendor... you can check their support out here: https://www.crucial.com/support If you have another PC, see if you can initialize and format the M.2 drive then move it to your main PC that was having issues. However, you may need to reach out to the manufacturer of your M.2 drive for technical assistance. Link to comment Share on other sites More sharing options...
Recommended Posts