Jump to content
Corsair Community

Force MP510 1.92TB write speeds outside cache


Recommended Posts

One of the specs of a Corsair Force MP510 1.92TB NVMe SSD is:

SSD Max Sequential Write: Up to 2,700MB/s

 

Of course this is the case when it is writing in the cache.

What is the maximum sequential write speed when it is writing outside the cache?

Link to comment
Share on other sites

  • 1 month later...

Ik have asked this question couple months ago to Corsair Support and got this dissappointing answer:

Unfortunately we do not make that information publicly available.

 

Samsung does a much better job. For the 970 EVo they says:

Sequential Write performance measurements are based on TurboWrite technology. The sequential write performances after TurboWrite region are: 300 MB/s(250GB), 600 MB/s(500GB), 1,200 MB/s(1TB) and 1,250 MB/s(2TB). Random Write performance measurements are based on TurboWrite technology. The random write performances after TurboWrite region are: 80,000 IOPS(250GB), 160,000 IOPS(500GB) and 300,000 IOPS(1TB/2TB).

 

I wish Corsair can also also be so transparant.

Link to comment
Share on other sites

Samsung 970 Pro 1Tb. Don't ask what I did to get the numbers on the right just know I did bad horrible things to the drive just to see if I could do it. The left is the present settings and where it will stay. I just wanted to see if it was possible :)

M2Speed.thumb.jpg.3222500bbe93af4f5bd1b5bf2bdcd5b9.jpg

Link to comment
Share on other sites

×
×
  • Create New...