Original Kodiak Posted April 5, 2020 Share Posted April 5, 2020 Hi there First post on the forum. Finished my 680x build, used the 3 LL fans that came with the case, and also bought a triple pack. I also have my h100 platinum, the usb for which is plugged into the commander. Lights are lit up and all fans spinning for case fans and h100. Unfortunately, the h100 is not showing up in icue, so I can not control the h100 rgb. Have checked all the fan and rgb headers for the h100 are in place, and usb is definitely plugged in properly to commander pro. Unfortunately I also can’t seem to find it in device manager? Commander pro is showing up fine in icue. Any help with this would be greatly appreciated. Hope you are all well and safe! Link to comment Share on other sites More sharing options...
Baio Posted April 5, 2020 Share Posted April 5, 2020 1) do you use a SATA splitter for the CoPro? If so, remove it. 2) try another motherboard header for the CoPro USB cable. 3) try an iCUE repair installation Baio Link to comment Share on other sites More sharing options...
Recommended Posts