The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Keyboards and Mice

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 05-14-2018, 11:06 AM
kc5vdj kc5vdj is offline
Registered User
kc5vdj's PC Specs
 
Join Date: Feb 2015
Posts: 56
POST ID # = 954598
kc5vdj Reputation: 10
Default Just got a used K95 RGB - Issues - Need assistance

I just got a used K95 RGB with reds this past week on eBay, and it does have a few issues.

1). some of the keyswitches feel gummy, and take a while to return up. 91% alcohol seems to be a temporary fix to this, and may eventually flush out the gunk, maybe.

2). well over 20 of the RGB LEDs have one (most of them) or more than one (a few of them) of the component color LEDs dead on them.

3). a cosmetic flaw introduced in shipping, where the top left corner of the macro pad area chipped off, probably due to bad handling, and crappy packing.

I can live with item 3, and found the chipped off part in the package, and will attempt to epoxy it, and sand down the seam.

I am toying with the idea of buying a bag of keyswitches to deal with the gummies, and just do the whole keyboard with new switches. There are plenty of youtube videos (including one that gives useful info by a real idiot who probably scratched and dinged the keyboard all to heck and back doing the disassembly), and i have a heat gun to remove the tramp stamp to get to the hidden screw.

That brings up the whole LED issue. Since I'm probably going to desolder all the switches and replace those with new, which LEDs should I buy?

Forward voltage for R, G, and B needed, PIV needed, brightness for R, G, and B needed. A Digi-Key part number would be nice (or Mouser, or Allied, or...). I don't want to get some of those cheap eBay / Amazon big bags from China, as although some of them are true deals, most of them seem to be factory seconds from what I've been reading.

Since I am not the original owner, and since this is probably out of warranty anyway, I can't get service from Corsair on this.

For the record, this is a CH-9000082-NA, S/N 152714508411.

I have done hard reset, as well as a forced firmware flash. It was already at 2.05, but I did it anyway in case of corruption. The LED issues persist, so are unlikely to be firmware related.

Last edited by kc5vdj; 05-14-2018 at 11:16 AM.
Reply With Quote


  #2  
Old 05-28-2018, 10:51 AM
kc5vdj kc5vdj is offline
Registered User
kc5vdj's PC Specs
 
Join Date: Feb 2015
Posts: 56
POST ID # = 956401
kc5vdj Reputation: 10
Default

Does anyone have the information on which RGB SMD LEDs to use in a K95 RGB?
Reply With Quote


  #3  
Old 05-28-2018, 01:19 PM
Inheritance's Avatar
Inheritance Inheritance is offline
CORSAIR Beta Team
 
Join Date: Jul 2013
Location: Somewhere in Texas
Posts: 5,305
POST ID # = 956428
Inheritance Reputation: 70
Default

I believe holding page up and Page down when you plug it in will reset the EProm. But if that doesnt work and you want to resolder everything idk if you can replace just the LEDs. I think you'll have to replace the entire switch unit with Cherry RGB switches.
__________________
Colors of the RAINBOW shine so bright!
USER IS NOT A CORSAIR EMPLOYEE
Come Join My Discord =(^.^)= [iCUE Guide]
Corsair USER Forums is NOT Corsair Tech Support
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.