N1ghtWalker Posted August 17, 2011 Share Posted August 17, 2011 these memories supposedly gives the per 1600Mhz 7-7-7-24 1.90v. The problem is that even come close to there. I've tried for the timings to 9-9-9-24 1.92V, FSB termination, NB voltage and without success! Not even gives boot. What do I have to do for the 1600Mhz? http://alojaimagens.com/images/s9yndlyxtj79r8uxuwo.jpg Link to comment Share on other sites More sharing options...
N1ghtWalker Posted August 17, 2011 Author Share Posted August 17, 2011 Anyone? I do not want to overclock the memory, just want to put the rate at which they reach (1600Mhz) ... Link to comment Share on other sites More sharing options...
peanutz94 Posted August 18, 2011 Share Posted August 18, 2011 You are limited by your CPU and MB. FSB is 1333 stock , so to get anything over that you are going to have to overclock. Link to comment Share on other sites More sharing options...
N1ghtWalker Posted August 18, 2011 Author Share Posted August 18, 2011 But because it's just that I can not get there by? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 18, 2011 Corsair Employee Share Posted August 18, 2011 I have explained this in another post please do not double post! Link to comment Share on other sites More sharing options...
N1ghtWalker Posted February 9, 2012 Author Share Posted February 9, 2012 Good evening RAM GUY. Today was my RMA board, because he thought that the problem of memories do not go to 1800Mhz, the slots were. But it seems that is one of the memories is not able. Simply the system unbootable. What do I need to do to send them to RMA? It is possible to send only what is bad (I have two)? thank you Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 9, 2012 Corsair Employee Share Posted February 9, 2012 The Highest memory frequency that would be supported on that system would be DDR1333, will the system post and pass http://www.memtest.org if the memory is set to DDR1333? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.