Jump to content
Corsair Community

Corsair 750D Full Case


Beatenpotato

Recommended Posts

Hi there!

 

I recently built my new computer using the 750D case, and I'm a little new to the whole experience.

I put in (2) 140mm Corsair fans on top, on the main corsair post for the case it says it can fit (2) 140's or (3) 120mm's

 

After measuring the length of the 140's and the distance of the screw slots they all match at roughly 6 inches

 

My question is, can I just fit (3) 140mm's on top?

Or would it be safer to leave the (2) 140's and put a 120 in the 3rd empty spot?

 

I tried browsing online to see if anyone else had done this but hadn't any luck.

 

Thanks for anyone's help or advice in advanced!

Link to comment
Share on other sites

I'm pretty sure the 5.25" drive bays are the issue putting a third 140mm fan in the top - they're too wide to fit inside, if I remember correctly. I've removed my 5.25" bays, so I can't tell you specifically.

 

That being said, You can easily fit a 280mm rad up on top if you like - I had an H110i GTX in there with no issues what-so-ever.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...