twisterslayer Posted April 13, 2015 Share Posted April 13, 2015 Hi all, I have a ASUS R9 290 GPU and was thinking of mounting it onto the HG10 A1. I understand that the bracket supports H55 and H80 to the H100i and H110. I was wondering does the HG10 A1 supports the H60 because the H60 is as though a replacement for the H55. Please help. Thanks! Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted April 13, 2015 Corsair Employee Share Posted April 13, 2015 The H60 is absolutely compatible with the HG10 A1. But pay attention to tubing length, though. Link to comment Share on other sites More sharing options...
Shyner Posted April 17, 2015 Share Posted April 17, 2015 Where can I find the tubing lengths for the different coolers. I did not see them on the tech specs page. I had been looking at the H60 for the hg10-n780. My initial plan was to place 2 of them, one per card, at the front of a Carbide A540 case. I cant imagine I will run into tube length issues, but can someone point me in the direction of some specs. I would like to be sure. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted April 20, 2015 Corsair Employee Share Posted April 20, 2015 Tubing length on the H60 is ~300mm, but the tubing is also pretty rigid. For your purposes I'd actually recommend a different cooler. Instead of the H60, I'd suggest using an H55, which has more pliant tubing. Alternatively, the H75 has traditionally been our go-to in-house for the HG10 due to its longer, more pliant tubing, low profile, and dual PWM fans. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.