The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Corsair Link

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 10-05-2017, 11:51 AM
bradsciera bradsciera is offline
Registered User
bradsciera's PC Specs
 
Join Date: Oct 2017
Posts: 6
POST ID # = 922272
bradsciera Reputation: 10
Default Corsair Link not detecting H100i V2 GTX

I have been having some trouble getting my AIO cooler to show up in the corsair link software, here is my current setup:
-Pump is connected to CPU_FAN
-Corsair link USB is connected to a USB 2.0 header on the mother board
basically everything is hooked up as the directions stated

The problem is the cooler is not being detected in the corsair link software
I tried uninstalling the USB driver and the link software multiple times and no luck.
Also in Device manager there is a yellow warning symbol next to the usb icon.
When i try to update the driver it says the latest and best version is installed blah blah blah.

So I guess I don't know what else to try and trouble shoot this problem.... maybe try using a different USB cable connected to the rear I/O

last note, everything is working fine temp wise just want to be able to control it and monitor the cooler in the corsair link software
Reply With Quote


  #2  
Old 10-05-2017, 12:32 PM
Corsair CJ's Avatar
Corsair CJ Corsair CJ is offline
Corsair Employee
Corsair CJ's PC Specs
 
Join Date: Jul 2016
Location: Corsair HQ
Posts: 674
POST ID # = 922278
Corsair CJ Reputation: 42
Default

Quote:
Originally Posted by bradsciera View Post
I have been having some trouble getting my AIO cooler to show up in the corsair link software, here is my current setup:
-Pump is connected to CPU_FAN
-Corsair link USB is connected to a USB 2.0 header on the mother board
basically everything is hooked up as the directions stated

The problem is the cooler is not being detected in the corsair link software
I tried uninstalling the USB driver and the link software multiple times and no luck.
Also in Device manager there is a yellow warning symbol next to the usb icon.
When i try to update the driver it says the latest and best version is installed blah blah blah.

So I guess I don't know what else to try and trouble shoot this problem.... maybe try using a different USB cable connected to the rear I/O

last note, everything is working fine temp wise just want to be able to control it and monitor the cooler in the corsair link software
Sounds like you're running into the unsigned driver issue that others have reported with the current release of CL4 (4.9). Try an earlier version such as 4.8 or 4.7 (you can find direct download links in the pinned "downgrade" post in this section of the forum, or you can go to our download page on the corsair website).

Let me know if that solves the problem. If so, please know we're working to resolve this issue.
Reply With Quote


  #3  
Old 10-05-2017, 05:15 PM
bradsciera bradsciera is offline
Registered User
bradsciera's PC Specs
 
Join Date: Oct 2017
Posts: 6
POST ID # = 922312
bradsciera Reputation: 10
Default

It Worked! now just getting 0 RPM for the fan readout. Is there an easy fix to this?
Also should the CPU_FAN in the bios be set to 100% all the time?

Update: Fixed the above issue by plugging into CPU_OPT and ignoring CPU_FAN under monitoring in the bios

Last edited by bradsciera; 10-05-2017 at 05:34 PM.
Reply With Quote


  #4  
Old 10-05-2017, 05:49 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 9,023
POST ID # = 922314
c-attack c-attack Reputation: 107
Default

Quote:
Originally Posted by bradsciera View Post
It Worked! now just getting 0 RPM for the fan readout. Is there an easy fix to this?
Also should the CPU_FAN in the bios be set to 100% all the time?

Update: Fixed the above issue by plugging into CPU_OPT and ignoring CPU_FAN under monitoring in the bios
You can address this by setting the header connected to the H100i GTX/v2 to 'Full Speed' in the BIOS Q-fan. On Asus boards, the OPT header is a mirror of the CPU Fan header, so hooking into OPT and ignoring CPU_Fan does not guarantee success or the required 12v/100% signal. This should be a preset in the E-Z BIOS (Q-fan section) or under the Monitoring tab in the Advanced BIOS. "Disabled" is the Advance BIOS language for Full Speed. There are the same thing and setting one will force the other.
Reply With Quote


  #5  
Old 10-06-2017, 08:13 AM
bradsciera bradsciera is offline
Registered User
bradsciera's PC Specs
 
Join Date: Oct 2017
Posts: 6
POST ID # = 922366
bradsciera Reputation: 10
Default

Thank you for the response I think I have the fan settings set up right in the BIOS, in corsair link, I am getting roughly 1700 rpm's for the pump and 1500 rpm's on the fans keeping my I7 7700k at around 35 degrees at idle.

I imagine this is why many users have pump problems as they fail to set up the fan speeds correctly in the BIOS...
Reply With Quote


  #6  
Old 10-06-2017, 11:29 AM
Puppetoffate's Avatar
Puppetoffate Puppetoffate is offline
Registered User
 
Join Date: Oct 2017
Posts: 6
POST ID # = 922377
Puppetoffate Reputation: 10
Default

I tried this and the driver still won't install. Any ideas?
Reply With Quote


  #7  
Old 10-06-2017, 11:36 AM
bradsciera bradsciera is offline
Registered User
bradsciera's PC Specs
 
Join Date: Oct 2017
Posts: 6
POST ID # = 922378
bradsciera Reputation: 10
Default

Make sure you do a reset after the CL is downloaded, I also had to try 2 previous versions of the CL for it to work.
This is the version that worked for me:

http://downloads.corsair.com/downloa...-v4.8.0.82.zip

Last edited by bradsciera; 10-06-2017 at 11:41 AM.
Reply With Quote


  #8  
Old 10-06-2017, 05:07 PM
Puppetoffate's Avatar
Puppetoffate Puppetoffate is offline
Registered User
 
Join Date: Oct 2017
Posts: 6
POST ID # = 922406
Puppetoffate Reputation: 10
Default

Quote:
Originally Posted by bradsciera View Post
Make sure you do a reset after the CL is downloaded, I also had to try 2 previous versions of the CL for it to work.
This is the version that worked for me:

http://downloads.corsair.com/downloa...-v4.8.0.82.zip
Link isn't working. Tried a few different versions of CL but it doesn't work. Seems like the problem is with the driver not the CL program.
Reply With Quote


Reply

Tags
corsair link, device detection, h100i v2

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.