BlakeyBlake Posted December 20, 2019 Share Posted December 20, 2019 (edited) I purcahsed the LL140 Kit with the Lighting Node. Have plugged both fans into the Lighting Hub and the Hub into the Lighting Node and the Node into the USB on my MSI B450 Mobo. The Fans only have 1 LED on by the looks of it and I cannot control them with the iCUE Software. Have clicked 2 Fans. Edited December 20, 2019 by BlakeyBlake Link to comment Share on other sites More sharing options...
DevBiker Posted December 20, 2019 Share Posted December 20, 2019 a) Can you post a screen shot of your iCUE configuration? b) Can you verify that the fans are in ports 1 & 2 on the Fan Hub? Link to comment Share on other sites More sharing options...
BlakeyBlake Posted December 20, 2019 Author Share Posted December 20, 2019 a) https://prnt.sc/qdlurm b) USB > Lighting Pro CH1 > Lighting Hub 1+2 > LL140s Link to comment Share on other sites More sharing options...
DevBiker Posted December 20, 2019 Share Posted December 20, 2019 OK. Next step ... what happens if you swap the fans on channels 1 and 2? Link to comment Share on other sites More sharing options...
BlakeyBlake Posted December 20, 2019 Author Share Posted December 20, 2019 https://prnt.sc/qdmgrh only 1 R G & B LED working in each fan now lol. Turned off Ram in ICUE so you can see Fan colours better. Link to comment Share on other sites More sharing options...
DevBiker Posted December 20, 2019 Share Posted December 20, 2019 Did you swap the fans in the hub? What about Instant Lighting? Last step would be to force a firmware update of the Lighting Node Pro. If that still doesn't resolve, you'll need to contact Support or exchange with your retailer. Link to comment Share on other sites More sharing options...
BlakeyBlake Posted December 20, 2019 Author Share Posted December 20, 2019 (edited) Yes I swapped the Fans in the Hub 1 & 2 around to get this Instant Lighting changes my RAM but Fans stay the same I think iCUE isn't detecting the Fans I tried Corsair Link and had the same issue I Forced an update before still no good Thanks heaps for the help x Edited December 20, 2019 by BlakeyBlake Link to comment Share on other sites More sharing options...
DevBiker Posted December 21, 2019 Share Posted December 21, 2019 Well, neither iCUE nor Link actually detect the fans. That's not how they work. You tell iCUE what you have. It then sends the appropriate control signal. The last thing is to try channel 2. If no better, contact support or get a replacement from your vendor. Link to comment Share on other sites More sharing options...
Recommended Posts