mnetting Posted March 8, 2019 Share Posted March 8, 2019 Just in case anyone wanted to see an original Corsair One system stripped down to the chassis I uploaded a few images at the link below: https://imgur.com/a/ODBLT0M Much easier to do than I originally expected actually. The only thing that was difficult to remove was the GPU due to the shroud being held on by three screws across a beam at the bottom of the case which required removal of the front/back/bottom panels before I could get to them. This though is a good design choice as it should keep the GPU from coming unseated during shipping or movement. That PCI-E extension cable has soooo many bends though. Impressive that it works as well as it does. I wonder if the new ones are that bent? Link to comment Share on other sites More sharing options...
parenek4 Posted March 14, 2019 Share Posted March 14, 2019 it would be much more helpful if you have had recorded the whole process instead of those two pictures. But thank you for sharing anyway. God job! What are the plans with case now? Link to comment Share on other sites More sharing options...
kidroc Posted March 22, 2019 Share Posted March 22, 2019 thanks but where's the board? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Mint Posted March 26, 2019 Corsair Employee Share Posted March 26, 2019 A good resource is also our upgrade page, which gives a lot of insight into the build of the original Corsair One. https://www.corsair.com/us/en/corsair-one-upgrade Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.