vizbiz Posted April 12, 2013 Share Posted April 12, 2013 I have an Akasa memory card reader that has one of these (see pix below) white connectors out of the back of it, and I ahve a variety of Corsair cables available with the pack that I received with the PSU, and want to know if I can power the Akasa reader white connector by plugging the black Corsair connetor into it. I believe they're designed to be plugged together but without any documentation I'm nervous about doing so, can anyone confirm these ARE supposed to be plugged together? Also, how do I get these images to show rather than the LINK showing? Thanks. Link to comment Share on other sites More sharing options...
peanutz94 Posted April 12, 2013 Share Posted April 12, 2013 want to know if I can power the Akasa reader white connector by plugging the black Corsair connetor into it. Yes! A 4 pin molex is a 4 pin molex. There is no difference other than the color of the connector. And if you look at both of them you'll notice they are also keyed to fit one way. Hope that helps. Also, how do I get these images to show rather than the LINK showing? When you upload your photo's to a file hosting site , they should give you a 'direct link". Just copy/paste that link directly in your reply. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.