Dstima Posted January 7, 2020 Share Posted January 7, 2020 Running Maximus XI Formula and board is NOT showing up in iCUE. Followed instructions exactly as shown. Previously was using the Corsair plugin and controlled everything just fine using AURA. (Running Dominator Platinum RGB) Is there a certain Firmware rev I need to run on my board? Link to comment Share on other sites More sharing options...
Luamche Posted January 7, 2020 Share Posted January 7, 2020 This is all well and good, but others like ThermalTake already have this built in for virtually all MB manufacturers, don't they? Link to comment Share on other sites More sharing options...
Dstima Posted January 7, 2020 Share Posted January 7, 2020 Not really. Peripheral manufactures all have their proprietary software. TT's software doesn't specifically support any MB, but does support Razor products. The only way to get EVERYTHING working is to go the other way...i.e. you have to rely upon MB software to support TT and Razor and Corsair...etc. Link to comment Share on other sites More sharing options...
TEAMSWITCHER Posted January 7, 2020 Share Posted January 7, 2020 Close, but there are still issues. I have an ASUS Maximus XI Code motherboard and here are the problems I encountered. 1. The profile is applied to the motherboard successfully, only when I start iCUE. 2. If I change the Profile the motherboard doesn't pick up on the new profile. 3. Regardless, the RGB headers are not picking up the profile, not on iCUE startup, not ever. Otherwise, I would call this a good start. But it feels more like ALPHA software, than BETA. Link to comment Share on other sites More sharing options...
Guitarmageddon Posted January 7, 2020 Share Posted January 7, 2020 Can someone elaborate exactly how the profile information is stored? If you have have Aura sync installed but not turned on, is the motherboard still getting any direction from the saved profiles within aura? I ask because on occasion within the past couple of months I have had a glitch that has been fixed by me deleting the XML file in the aura folder "lastprofile.xml" Is icue still saving its profile in this folder? I really really want to switch to using icue for this but I am slightly apprehensive because I would still need to use Aura to control my g skill ram. I can't wait for icue to be a One-Stop shop because the software is the best in the business. I am several versions behind on icue, Is it worth upgrading at this point? Aura sync has jaded me on applying updates for any RGB software. Link to comment Share on other sites More sharing options...
ascully Posted January 7, 2020 Share Posted January 7, 2020 Works fine on my asus b350F, but it doesnt pick up the ram at all. I assume that is so I buy Corsair ram lol Link to comment Share on other sites More sharing options...
uKGMAN Posted January 7, 2020 Share Posted January 7, 2020 This is awesome! Works fantastic on my strix z390-e, I have been wanting this for a long time Link to comment Share on other sites More sharing options...
blownart Posted January 7, 2020 Share Posted January 7, 2020 Is there any documentation available how to code the plugins? I would really be interested to add Philips hue support or MSI mystic light. Link to comment Share on other sites More sharing options...
MikeAten Posted January 7, 2020 Share Posted January 7, 2020 Got it working with no issues on ROG STRIX Z390-E. This is amazing. Here's to hoping that my ROG 1070ti will get support in iCue this year Link to comment Share on other sites More sharing options...
an3k Posted January 7, 2020 Share Posted January 7, 2020 ASUS Rampage V Edition 10 works perfectly. It takes some time until it is shown in iCUE but once it is all areas are correctly recognized and "addressable". Link to comment Share on other sites More sharing options...
cheolieces Posted January 8, 2020 Share Posted January 8, 2020 Works fine on Asus ROG Strix x570-e Gaming. Issue is I loose control of the Strix 5700 XT. It won't sync and I can't have custom effects. Right now I have 3 custom effects on my LL120s, H100i Platinum, Vengeance RGB and peripherals. It won't allow the match up like Jacknet RGB Sync for my GPU and Motherboard Link to comment Share on other sites More sharing options...
Kvantum Posted January 8, 2020 Share Posted January 8, 2020 (edited) Works fine for my Maximus X Code board, but the RGB strip options aren't affecting a Deep Cool RGB anti-GPU sag brace I have. Also, ideally I'd need it to affect G.Skilll RAM and an Asus Strix 1080Ti as well. Still, this is progress, and any progress is appreciated. Edited January 8, 2020 by Kvantum Link to comment Share on other sites More sharing options...
LMT0286 Posted January 8, 2020 Share Posted January 8, 2020 any word on icue working with Asus ROG Strix 2080 super GPU? Link to comment Share on other sites More sharing options...
KnightRider7880 Posted January 8, 2020 Share Posted January 8, 2020 (edited) Did you drop the extension into the folder? And upgrade your iCUE version? The extension is in the correct folder, My iCue is fully up to date as well as my Aura EDIT: Nevermind, rebooted the PC as i never did so and it's working beautifully now! Thank you! Edited January 8, 2020 by KnightRider7880 Link to comment Share on other sites More sharing options...
larsiano Posted January 8, 2020 Share Posted January 8, 2020 Worked once I "Enabled Plugins" or maybe as stated above I needed to wait some time after starting the app for it to appear? (took me 2 minutes to enable)? If required maybe add it to the instructions. thanks corsair works fine! btw: now that plugins are enabled and i do not use Lenovo hardware is it logical to remove this folder to save system resources and increase loading times? Link to comment Share on other sites More sharing options...
blownart Posted January 8, 2020 Share Posted January 8, 2020 btw: now that plugins are enabled and i do not use Lenovo hardware is it logical to remove this folder to save system resources and increase loading times? That will save you 2 microseconds, it doesn't make a difference. Link to comment Share on other sites More sharing options...
DELTAprime Posted January 8, 2020 Share Posted January 8, 2020 This is cool, but I really need Asus GPUs added. I hope they can be added soon. Link to comment Share on other sites More sharing options...
xufos69 Posted January 8, 2020 Share Posted January 8, 2020 my asus maximus XI formula board shows up in icue but the leds doesn't turn on. I've followed the methods on page 1. Install latest asus aura 1.07.79, install icue 3.24.52, etc but nothing happens only ASUS motherboard board shows up on icue :( maybe Corsair Team needs to fix it first Link to comment Share on other sites More sharing options...
Falcon2045 Posted January 8, 2020 Share Posted January 8, 2020 Awesome! Works fine on my ROG Strix X570-E! I didn't even need the Aura Sync software mentioned in the first post, the most recent Armoury Crate version is enough! Link to comment Share on other sites More sharing options...
Cobra Commander Posted January 8, 2020 Share Posted January 8, 2020 Dear Corsair Team and James! Happy New Year to you and all of the team ;) Thanks for the great option! I know this program is in beta yet, but please add support for the ASUS RAMPAGE V 10TH Edition motherboard too. Thank you Link to comment Share on other sites More sharing options...
kuldud Posted January 8, 2020 Share Posted January 8, 2020 Just to clarify, do you have Armoury Crate installed instead of AURA? If that's the case and it's working properly, I'll do that too so I can regain control of my LiveDash. Thanks :) Yes, i am just using armoury crate and removed aura. Link to comment Share on other sites More sharing options...
Zammin Posted January 8, 2020 Share Posted January 8, 2020 Awesome! Works fine on my ROG Strix X570-E! I didn't even need the Aura Sync software mentioned in the first post, the most recent Armoury Crate version is enough! Excellent, thanks for confirming. I'll give Armoury Crate a try. Link to comment Share on other sites More sharing options...
Zammin Posted January 8, 2020 Share Posted January 8, 2020 Yes, i am just using armoury crate and removed aura. Awesome. Cheers! Link to comment Share on other sites More sharing options...
m2geek Posted January 8, 2020 Share Posted January 8, 2020 OH-MY-GOD... Thank you *So* much for this!!! I've wanted this for soooo long, I could literally cry. Strix X570-F owner :) Link to comment Share on other sites More sharing options...
Archxangelos Posted January 8, 2020 Share Posted January 8, 2020 Anyone know if this will work with Asus GL12CX desktop my desktop is certified for asus aura and amory crate but corsair only lists approved mobo's. the mobo in this desktop is custom made from asus. Link to comment Share on other sites More sharing options...
Recommended Posts