cheolieces Posted October 1, 2019 Share Posted October 1, 2019 I am looking to find out the max depth of a GPU I can use on the Crystal 680X. I can't seem to find it anywhere. I know it will be tight but I plan to vertically mount the Asus ROG Strix 5700XT. The deminsions are as follows: 12 " x 5.1 " x 2.1 " Inch 30.5 x 13 x 5.4 Centimeter My fan layout in the case is as follows: Front 3 Intake Top 2 Exhaust Rear Exhaust Bottom 2 Intake. As you can see there will be pretty good air flow. I will be using the Hydro Series H100i RGB Platinum CPU Cooler. So the only heat really will be from the GPU. There will be no overclocking the GPU. My thought is vertically will be ok if there is some room since the bottom 2 fans are intake and my home stays pretty cool. Thanks for the help Link to comment Share on other sites More sharing options...
HighAltitudes Posted October 4, 2019 Share Posted October 4, 2019 I'm sort of in the same boat as you. I'd like to vertically mount an Aorus 2080 Ti Xtreme and its like 2.59" thick, meaning the fans will likely be right up on the glass pretty close on the 680x. Link to comment Share on other sites More sharing options...
c-attack Posted October 4, 2019 Share Posted October 4, 2019 Same as max CPU cooler height. Link to comment Share on other sites More sharing options...
mrshrir Posted October 7, 2019 Share Posted October 7, 2019 you have about 6.5cm till it will too close to the glass. meaaured it for ya, i have a 2080TI evga xc watercooled AIO, mounted vertically Link to comment Share on other sites More sharing options...
cheolieces Posted October 12, 2019 Author Share Posted October 12, 2019 you have about 6.5cm till it will too close to the glass. meaaured it for ya, i have a 2080TI evga xc watercooled AIO, mounted vertically Thanks for the help. Do you have a x570 motherboard? If so are you using a 4.0 riser cable to vertical mount? Link to comment Share on other sites More sharing options...
mrshrir Posted October 14, 2019 Share Posted October 14, 2019 no, i have a z370 , using 3.0 riser cable from ebay. works fine Link to comment Share on other sites More sharing options...
Recommended Posts