Odaik Posted August 14, 2010 Share Posted August 14, 2010 Hello, I am interested in purchasing the Corsair 700D. Due to the layout of the system and the size of my radiator with the fans+shrouds, the radiator will have to be on top of the 3 120mm exhaust slots in the roof of the case. As a result, I'd need to cut out those 3 mesh grills to stop airlow deadspots from arising on the radiator. I have never modded a case before - how exactly could I go about cutting these mesh grills out? I'd greatly appreciate any advice. Thanks, Odai. Link to comment Share on other sites More sharing options...
E46Johnny Posted August 14, 2010 Share Posted August 14, 2010 Here are some youtube tips fore you. - - - http://www.youtube.com/user/MonsterMawd Hope this will help you. :): Link to comment Share on other sites More sharing options...
Odaik Posted August 16, 2010 Author Share Posted August 16, 2010 Many thanks for those links - very useful indeed. As, from what I can see, there is very little cutting involved when removing only those meshes; is it possible at all to do this without any kind of power tool? Link to comment Share on other sites More sharing options...
E46Johnny Posted August 17, 2010 Share Posted August 17, 2010 Yes, but the possibility too get uneven / damaged edges will be much bigger. I will say yousing a steel hand saw and files you will need some skills too make it look nice. The roundest hole, will com from the hole saw, and as a mechanic, it would have been my first choice. The dremmel is a nice tool, and yous`t the right way can do allot fore you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.