ryouga Posted June 30, 2020 Share Posted June 30, 2020 (edited) As per my other thread I had a dead unit and as it was new I sent it back to where I purchased and got a replacement. Now I have a strange new issue, the pump RGB's don't turn on but they did on previous unit. Firmware is latest. EDIT : oops two issues. I also have a problem with the fans connected to the lighning node pro. When powering on they are fine in the bios but when they go into Windows they turn off. I check Icue and if I go into lightning node settings they come on with a faint light, if I select hardware lighting or a profile they turn on normally but if I close the settings page or go to another setting i.e the cooling or ram the rgb's again turn off, they only stay on if I minimise the page and profile they are on. Edited June 30, 2020 by ryouga 2 seperate issues. Link to comment Share on other sites More sharing options...
Recommended Posts