IseeUdere Posted December 28, 2019 Share Posted December 28, 2019 Hey all so recently I decided to put 9 LL120s into my system (3 on my H150i and 6 for side and bottom intake). Everything is working fine in terms of RGB control and RPM except for these 2 fans in ports 5 and 6. They seem to be capped at around 670ish RPM. I've tried everything to get around it, including updating to the latest everything and reinstalling all corsair software, but to no avail. If anyone has any solutions/suggestions let me know! Thanks in advance! Also here's a picture of the issue: https://imgur.com/a/GIs6Lqf (Custom 1 is a preset for a fixed 1000 RPM) Link to comment Share on other sites More sharing options...
c-attack Posted December 28, 2019 Share Posted December 28, 2019 Go into the Commander Pro settings and make sure all 6 ports are set to 4 pin (instead of auto). This is a bit of a long shot as a fix, but useful regardless and should stop any fan blasting at boot. Swap fans 4 & 5 on the C-Pro (fan power cable only). Does the issue travel with the fan to #4? Or is the new Fan 5 also stuck at minimum speed? Link to comment Share on other sites More sharing options...
IseeUdere Posted December 28, 2019 Author Share Posted December 28, 2019 Wow I feel really stupid. The first part worked perfectly. Thanks for the solution haha Link to comment Share on other sites More sharing options...
Recommended Posts