RockandGrohl Posted August 24, 2020 Share Posted August 24, 2020 (edited) Hello all, I have a Corsair Lux keyboard, Asus Motherboard and Vengenace RAM. I am using CPU & GPU temperature to dictate lighting colours for my RGB products, this works perfectly. For some reason, since updating from 3.28 to 3.31 I have been unable to control my RAM RGB colour at all. Look here: https://imgur.com/nwCdZvV You can see there's only one lighting effect and none of the colours match. The RAM lights stay orange and pink no matter what. Under the device options "Enable full software control" is selected and I'm on the latest firmware. What can I do to fix this? Thanks. Edited August 24, 2020 by RockandGrohl Link to comment Share on other sites More sharing options...
RockandGrohl Posted September 1, 2020 Author Share Posted September 1, 2020 Bumping the post, do Corsair look at these forums? Link to comment Share on other sites More sharing options...
Corsair Employee Greybeard Posted September 2, 2020 Corsair Employee Share Posted September 2, 2020 Hey RockandGrohl , sorry to hear that. Looks like the LEDs on the RAM are stuck to that orange and pink. What happens if you customize the LEDs on the RAM on its own? meaning not enabling lighting link, does it behave the same way? I would also try rolling back to 3.28 and see if the problem goes away. At least we know that that your RAM has the latest FW. Link to comment Share on other sites More sharing options...
Recommended Posts