Infinite_Lemons Posted December 4, 2020 Share Posted December 4, 2020 I recently purchased the Corsair 465x White, and I wanted to put an H150i in it. The product page says it supports a 360mm, but I don't know in which orientation. Would I be able to put an H150i elite into the front of the case with the tubes starting at the bottom? Would the tubes still reach the cpu? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair HP Posted December 7, 2020 Corsair Employee Share Posted December 7, 2020 Hi Ifinite Lemons, The tubes will not be able to be mounted downwards due to the PSU shroud. There is plenty of room for top mounted tubes, and they will still be located higher than the pump head. https://www.corsair.com/medias/sys_master/images/images/he7/hfe/9330348851230/-CC-9011189-WW-Gallery-465X-WHITE-05.png Link to comment Share on other sites More sharing options...
Infinite_Lemons Posted December 10, 2020 Author Share Posted December 10, 2020 Is it ok for the AIO to have the pipes start at the top? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair HP Posted December 14, 2020 Corsair Employee Share Posted December 14, 2020 Yes, you can just place the AIO in the top front slots and you will be fine. Link to comment Share on other sites More sharing options...
Recommended Posts