Jump to content
Corsair Community

Corsair H115i Pro RGB


Veter

Recommended Posts

Всем добра. Подскажите.

1.Поставил водянку Corsair H115i Pro RGB, а при нагрузке процессор стал греться ещё больше. До этого стоял обычный кулер на алюминиевом радиаторе.

2.Почему показания датчиков температуры отличаются от температуры в программе iCUE? Прилагаю скрин

215729979_105710851080108410861082110110821088107210851072(34).thumb.png.60dd6a22b73ee4953f88bcb252045cb6.png

Edited by Veter
Link to comment
Share on other sites

"H115i Temp" is coolant or liquid temperature. This is the measure of how the cooler needs to run. Your CPU can be hot, but if the coolant temperature does not increase, running the fans faster will not remove more heat from the liquid.

 

Your coolant to CPU temp differential is +65C. That is an impossible value to live with. You would need to keep the room between 5-15C to keep from going over 80C. You need to lower or get control over your Vcore. I can't see that in the picture. If your CPU is hot all the time, including at idle (50-60C), then you may not have the pump properly mounted.

Link to comment
Share on other sites

×
×
  • Create New...