sharp-spark Posted May 30, 2020 Share Posted May 30, 2020 Just installed some QLs in my case. I currently have the top fans as an exhaust, so the rear is visible. The lighting effects get mirrored when I do this however (see pic). Is there any way to flip the effects for the top fans, or switch the front and rear effects? I know I can rotate, but that doesn't fix the issue. I know I can apply different effects to each fan (e.g. clockwise on the front and anti-clockwise on the top), but I don't see any way of then synchronising these effects. Colours or timing may be out of sync. Link to comment Share on other sites More sharing options...
tbrock47 Posted September 18, 2020 Share Posted September 18, 2020 Bumping this. I have 4 QL fans as intake and 2 QL fans as exhaust. The software in its current implementation only allows you to rotate the fans, but not flip them over. Thus lighting effects such as "Infinity", "Arc", "Rotary Stack" and others have their effects mirrored such as left is right, and clockwise is counter-clockwise. Is anyone aware of any software fix in the works to allow the flipping/mirroring of QL fans? Link to comment Share on other sites More sharing options...
Recommended Posts