Jump to content
Corsair Community

CORSAIR ONE Z270 BIOS 4C3 Update SOP (October 2019)


Corsair CJ

Recommended Posts

  • Corsair Employee

CORSAIR ONE Z270 BIOS 4C3 Update SOP

Important Note: This guide ONLY APPLIES to CORSAIR ONE systems equipped with Z270 motherboards and 7th Gen Intel Core i7 processors.

 

Step 1 – Prepare a USB drive with the BIOS update files

 

Download BIOS update from CORSAIR.com (or click here for direct download) and prepare a USB flash drive by unzipping the download file and copying the contents of the unzipped folder to the root of a blank USB drive (formatted FAT32).

 

Step 2 – Boot to BIOS w/USB drive inserted

 

Insert prepared USB drive into your CORSAIR ONE and boot to BIOS by pressing DELETE key until the BIOS screen appears.

 

Step 3 – Disable Secure Boot in BIOS

 

Once in BIOS, hit F7 and go to “Settings” -> “Advanced” -> “Windows OS” -> “Secure Boot.” Ensure that “Secure Boot Mode” is set to “Disabled.”

 

attachment.php?attachmentid=36779&stc=1&d=1571249359

 

Step 4 – Boot from USB flash drive

 

Change the Boot Priority in “Settings” -> “Boot.” Change “Boot Option #1” to the UEFI USB Key (the prepared USB drive with the BIOS update files).

 

Hit F10 to save settings and restart, the system should now boot from the USB drive.

 

attachment.php?attachmentid=36780&stc=1&d=1571249364

 

Step 5 – Follow prompts to proceed with initial BIOS flash

 

attachment.php?attachmentid=36781&stc=1&d=1571249368

 

Note: If the current BIOS is version 4QF, the following prompt will appear:

 

attachment.php?attachmentid=36782&stc=1&d=1571249373

 

Note: The system will reboot once during this process.

 

attachment.php?attachmentid=36783&stc=1&d=1571249379

 

Step 6 – Reboot to complete initial BIOS flash and return to BIOS to begin second flash]

 

Press DELETE key as the system boots to return to BIOS screen.

 

attachment.php?attachmentid=36784&stc=1&d=1571249384

 

Hit F7 to go to “Advanced mode.”

 

Select “M-FLASH”, follow the prompts.

 

attachment.php?attachmentid=36785&stc=1&d=1571249388

 

Select the “E7A66IZ1.4C3” file on the USB drive.

 

attachment.php?attachmentid=36786&stc=1&d=1571249393

 

Continue following the prompts, the process may take a minute or so once it starts.

 

Note: The system will reboot twice during this process.

 

attachment.php?attachmentid=36787&stc=1&d=1571249397

 

Step 7 – Go into BIOS again and apply default settings

 

attachment.php?attachmentid=36788&stc=1&d=1571249402

 

During second reboot of the BIOS flash, hit DELETE on your keyboard until the BIOS screen appears again.

 

Hit F6 to apply “Optimized Default” settings (this’ll undo the “Boot Priority” and “Secure Boot” changes made previously)

 

Hit F10 to save and exit BIOS.

Step3.jpg.c3cfc1774f80fd8b95f6a4a61de7f413.jpg

Step4.jpg.c9f172016b0d184e90d935cb2da400f0.jpg

Step5.jpg.a696cc3d71bfd2927e897e9f21834289.jpg

Step5_1.jpg.e92fb3015e3bc632a5e8b00e9c839c08.jpg

Step5_2.jpg.e66f0abb578148a90f492ad303a19f2b.jpg

Step6.jpg.948cefaa1ed7884829273aec1951913c.jpg

Step6_1.jpg.914dd7297d11cdfdf84d611bef3edf3d.jpg

Step6_2.jpg.6158556ee0b99a6a0d49367bf8ff1283.jpg

Step6_3.jpg.034c433d603365bb2fec34715f09a8f8.jpg

Step7.jpg.b2bad48fbc7c11217bcded89632ed634.jpg

Edited by Corsair CJ
Fresh BIOS file download link.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...