The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Notices

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 12-04-2019, 06:33 AM
buddah723 buddah723 is offline
Registered User
buddah723's PC Specs
 
Join Date: Dec 2019
Posts: 4
POST ID # = 1026220
buddah723 Reputation: 10
Default I *FIXED* my issue with the Corsair H115i PRO RGB is not showing up in iCUE after

*UPDATE* I seem to have fixed the issue.

This is what I did to have the pump show back up:

1) Downgrade to an earlier version of iCUE that worked with the pump. = NO-GO *Did a total removal and clean install of iCUE*

2) Disconnect all the fans and initialize them all into iCUE one by one.

3) Move the USB cable from the pump from the motherboard and plugged it into the CoPro, then plugged the CoPro USB into the motherboard. *Swapped slots about 4X and different combinations. Once I got all 4 light strips and 5 fans running, I knew I was on the right path...*

4) Plugged the fan connectors to itself instead of plugging them into the CoPro.

*I think this is the step that forced the computer / system to identify the H115I Pro as a device by itself..*


Now I have control of the pump and the fans again in iCUE.

This worked for me. Good luck..
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.