The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cases

Notices

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 11-27-2019, 11:28 AM
slogan19 slogan19 is offline
Registered User
 
Join Date: Nov 2019
Posts: 8
POST ID # = 1025405
slogan19 Reputation: 10
Default 680x power button

I just did an install in a new 680x case. System bench tested fine, I get everything installed, apply power, it turns on for a couple of seconds and switches off. If I unplug the front panel connectors and power on via motherboard, both via start button and jumping pins, it operates as normal. I've submitted a ticket about the power button as it's the only conclusion I can come to. The light works fine and when I push it it pushes in, but it would appear the circuit is stuck. Unless anyone else has another suggestion. It's been running for 12 hours when powered on via motherboard start button and front panel connector unplugged so everything else seems to be fine.

My first question is if I swap the pins to put the connector for the reset button as the power button will that work as a temporary solution so I don't have to reach in the case to turn it on?

Second question, how hard is a power button to swap out?

thanks!
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.