UdoG Posted August 16, 2018 Share Posted August 16, 2018 Hi, Can't get my second Commander Pro to work from the USB end of the first Commander Pro. Both powered via SATA - what I'm doing wrong? Do I have to connect both CP on the Motherboard? FYI - the fan, which is connected on the second CP, is working, but I'm not able to Control this fan in the CP Software (only 6 fans are displayed). Thanks for your help! Link to comment Share on other sites More sharing options...
Zotty Posted August 16, 2018 Share Posted August 16, 2018 have you tried them the other way around?.. they should work daisy chained. Link to comment Share on other sites More sharing options...
UdoG Posted August 16, 2018 Author Share Posted August 16, 2018 It's working now :-). I connected the second CP now first, updated the firmware, reconnect the other CP and now I can manage all 12 fans within Corsair Link. Thanks. Link to comment Share on other sites More sharing options...
Zotty Posted August 16, 2018 Share Posted August 16, 2018 YAY!!!.. glad you are sorted dude :)... Hope so see some pictures of your build :).. which Case? Link to comment Share on other sites More sharing options...
UdoG Posted August 16, 2018 Author Share Posted August 16, 2018 Case = Thermaltake View 71 I can post some pictures as soon as I finished my setup. Link to comment Share on other sites More sharing options...
Zotty Posted August 16, 2018 Share Posted August 16, 2018 sounds good :)... good luck man Link to comment Share on other sites More sharing options...
UdoG Posted August 16, 2018 Author Share Posted August 16, 2018 Thanks Zotty :) Link to comment Share on other sites More sharing options...
Br007 Posted August 17, 2019 Share Posted August 17, 2019 I have the same problem. I have both commanders connected to the mb. I only see fans connected to the 1 CP. Link to comment Share on other sites More sharing options...
Recommended Posts