Radltruhe Posted July 2, 2017 Share Posted July 2, 2017 There is no auto restore normal operation. Every time it is triggered, you have to manually restore it. This needs to be more comfortable and automation is required here. Link to comment Share on other sites More sharing options...
JeanDiv14 Posted July 5, 2017 Share Posted July 5, 2017 100% At first I thought it was the 'minimum' setting, i.e. if the temp comes down to under the minimum, then restore normal operation.. but no, not the case. It feels like this should be a default setting?! Surely? Otherwise if I leave a queue of movies to transcode when I go to bed, the encodes take an hour and my system runs on full blast all night? Surely not. Does anyone know how to handle this? Ta, Jea Link to comment Share on other sites More sharing options...
MarianoSilva Posted November 28, 2017 Share Posted November 28, 2017 This issue is causing me a lot of trouble ... with my wife! :) Once the "not normal operation" mode is triggered, it never comes back to normal... question: What does trigger this "not normal" operation mode? Link to comment Share on other sites More sharing options...
The1GoatBoy Posted April 16, 2018 Share Posted April 16, 2018 Hi, I'm having the same problem! I know what triggers my 'not normal' operation, I want all my fans to go on 100% when my gpu hits 75 degrees to flush my case as it were. So I set that to happen but once it's triggered they then stay on 100% even if my gpu goes back to idle temps until i manually press 'restore normal operation'. This sucks. anyone found a fix? Link to comment Share on other sites More sharing options...
DevBiker Posted April 17, 2018 Share Posted April 17, 2018 This is by design y'all. No fix will be forthcoming. Link to comment Share on other sites More sharing options...
onursen Posted August 18, 2020 Share Posted August 18, 2020 hi, use this batch file. the batch file will wait 30min., close CorsairLink4 and reopen it. @echo off REM wait 30 Minutes after Corsair Alarm echo "CORSAIR ALARM ACTIVE" timeout /T 1800 taskkill /F /IM CorsairLink4.exe taskkill /F /IM CorsairLink4.Service.exe start "" "C:\Program Files (x86)\CorsairLink4\CorsairLink4.exe" EXIT 0 Link to comment Share on other sites More sharing options...
Recommended Posts