Enguia Posted June 12, 2013 Share Posted June 12, 2013 Hi, please I can use some advice .. When upgrading my system memory (from 2x2 GB kingstom to 2x8 GB Corsair) I am facing some problemas. Install the memory, everything fine. Motherboard boot, enters setup, ok. But when starting Windows 8 64 Bits, right after the loading logo system crashs and Windows restarts the computer Have already tried to boot from a USB for a fresh W8 installation but same problem occurs when logo screen appears. Weird thin, this machine is a dual boot with Linux (Ubuntu). Ubuntu worked just fine with the new memory, no complains. Follows my hardware configuration. Have alreade entered bios setup (after updating bios flash), tried to configure memory, voltage, everything according to corsair memry label but same problem continues Have already tried to resert bios and to increase voltage for memory Have no more ideas, could anyone please help ? Any clue ? Thanks in advace, Marcelo (Rio de Janeiro, Brazil) Corsair model CMZ16GX3MA21600C10 Memory Instructions (label): 16 Gb (2x8GB), 559096, 131900283 1600 MHz, 10-10-10-27 1.50v ver 3.24 Intel Motherboard DH55HC Bios Version: TCIBX10H.86A.0048.2011.1206.1342 Processor Type: Intel Core i3 CPU 540 @ 3.07 GHz Bios Memory Configuration Performance Memory Profile: Manuel – User Defined Memory Multiplier: 10 tCL: 10 tRCD: 10 tRP: 10 tRASmin: 27 Memory Voltage: 1.50v Host Clock Frequency Override: Manual Host Clock Frequency (MHz): 160 Memory Configuration: Multiplier: 10 Speed: 1600 MHz Voltages: Memory; 1,5000 v Link to comment Share on other sites More sharing options...
thenosbod Posted June 12, 2013 Share Posted June 12, 2013 does it support 8gb sticks? Link to comment Share on other sites More sharing options...
peanutz94 Posted June 14, 2013 Share Posted June 14, 2013 Sorry that board with that CPU can not use 8 gig modules. Your board has a max capacity of 16 gigs total memory over 4 slots. So that would be a 4 gig module max. Link to comment Share on other sites More sharing options...
thenosbod Posted June 14, 2013 Share Posted June 14, 2013 just as I thought Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.