jasperq Posted August 13, 2020 Share Posted August 13, 2020 (edited) I just purchased a 2 x 16 Gb upgrade for my new mac mini (late 2018). serialnr = CMSA32GX4M2A2666C18 It only recognizes one bank, bank 0 is empty. I tried to install the original 2 x 4 Gb again and they work, so it's not a failure in the bank of the mac mini. Any suggestions how to fix this? It is the correct RAM right? thans, Jasper Edited August 13, 2020 by jasperq Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted September 1, 2020 Corsair Employee Share Posted September 1, 2020 (edited) Double check to ensure that the modules are aligned in the SO-DIMM slots correctly (you can troubleshoot the kit as well by trying each stick from the memory kit in the known working slot to determine if one of the modules might have an issue). Additional steps: You could try a PRAM reset on your mac (do this key combination while booting your Mac with a wired keyboard): CMD+Option+P+R OR Unplug your Mac Mini from power and press/hold the power button for approx. 5 seconds. These are general troubleshooting steps so please contact our tech support team at https://help.corsair.com for more assistance if needed. Edited September 1, 2020 by Corsair CJ Link to comment Share on other sites More sharing options...
Recommended Posts