The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Keyboards and Mice

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #16  
Old 07-25-2018, 05:38 PM
Reyalyn Reyalyn is offline
Registered User
Reyalyn's PC Specs
 
Join Date: Jul 2018
Posts: 2
POST ID # = 965517
Reyalyn Reputation: 10
Default

Quote:
Originally Posted by Goudada View Post
Instructions sent to me by corsair for my Corsair Schmitar Pro RGB Model Code: CH-9304111

Note: I will not be held responsible if you further break your device by installing this firmware on the wrong mouse or you fail to follow the instructions below.

Firmware File: https://drive.google.com/file/d/1hwX...ew?usp=sharing

1: Unplug your mouse from the computer.
2: Locate the small pinhole underneath your mouse. For some, this will be located directly on the bottom in plain sight. On others, it will be located underneath one of the removable weights attached to the bottom of the mouse.
3: Using a small paperclip or push-pin, press down on the button inside the pinhole.
4: Plug your mouse back into the computer, while holding down the pinhole button.
5: Once it is plugged back in, your computer should recognize a drive called CRP_Disabled. Please open this.
6: Download the firmware file from the ticket. If it is compressed into a .RAR file, please extract this file to an easily found location on the computer.
7: Delete the file FIRMWARE.BIN from the CRP_DISABLED drive, and then place the file with ISP in it’s name to the CRP_Disabled drive.
8: Once you have performed the steps above, please unplug your mouse and then plug it back in. The device will then return to normal. Please test to see if the issue reappears. If it does, please inform us on the ticket for further troubleshooting.

Edit: attached zipped file to post.
Worked for me as well. Thank you so much!
I think I'm going to hold off from updating my firmware for awhile lol
Reply With Quote


  #17  
Old 07-25-2018, 07:52 PM
djomaster djomaster is offline
Registered User
djomaster's PC Specs
 
Join Date: Jul 2018
Posts: 2
POST ID # = 965540
djomaster Reputation: 10
Default

Quote:
Originally Posted by Goudada View Post
Instructions sent to me by corsair for my Corsair Schmitar Pro RGB Model Code: CH-9304111

Note: I will not be held responsible if you further break your device by installing this firmware on the wrong mouse or you fail to follow the instructions below.

Firmware File: https://drive.google.com/file/d/1hwX...ew?usp=sharing

1: Unplug your mouse from the computer.
2: Locate the small pinhole underneath your mouse. For some, this will be located directly on the bottom in plain sight. On others, it will be located underneath one of the removable weights attached to the bottom of the mouse.
3: Using a small paperclip or push-pin, press down on the button inside the pinhole.
4: Plug your mouse back into the computer, while holding down the pinhole button.
5: Once it is plugged back in, your computer should recognize a drive called CRP_Disabled. Please open this.
6: Download the firmware file from the ticket. If it is compressed into a .RAR file, please extract this file to an easily found location on the computer.
7: Delete the file FIRMWARE.BIN from the CRP_DISABLED drive, and then place the file with ISP in it’s name to the CRP_Disabled drive.
8: Once you have performed the steps above, please unplug your mouse and then plug it back in. The device will then return to normal. Please test to see if the issue reappears. If it does, please inform us on the ticket for further troubleshooting.

Edit: attached zipped file to post.
Thank you so much. worked for me also
Reply With Quote


  #18  
Old 07-26-2018, 04:41 AM
Rønn Rønn is offline
Registered User
 
Join Date: Jul 2018
Posts: 2
POST ID # = 965577
Rønn Reputation: 10
Default

Quote:
Originally Posted by Goudada View Post
Instructions sent to me by corsair for my Corsair Schmitar Pro RGB Model Code: CH-9304111

Note: I will not be held responsible if you further break your device by installing this firmware on the wrong mouse or you fail to follow the instructions below.

Firmware File: https://drive.google.com/file/d/1hwX...ew?usp=sharing

1: Unplug your mouse from the computer.
2: Locate the small pinhole underneath your mouse. For some, this will be located directly on the bottom in plain sight. On others, it will be located underneath one of the removable weights attached to the bottom of the mouse.
3: Using a small paperclip or push-pin, press down on the button inside the pinhole.
4: Plug your mouse back into the computer, while holding down the pinhole button.
5: Once it is plugged back in, your computer should recognize a drive called CRP_Disabled. Please open this.
6: Download the firmware file from the ticket. If it is compressed into a .RAR file, please extract this file to an easily found location on the computer.
7: Delete the file FIRMWARE.BIN from the CRP_DISABLED drive, and then place the file with ISP in it’s name to the CRP_Disabled drive.
8: Once you have performed the steps above, please unplug your mouse and then plug it back in. The device will then return to normal. Please test to see if the issue reappears. If it does, please inform us on the ticket for further troubleshooting.

Edit: attached zipped file to post.
Worked for me aswell, thanks :)
Reply With Quote


  #19  
Old 07-26-2018, 08:20 AM
VibePositiva VibePositiva is offline
Registered User
 
Join Date: Jul 2018
Posts: 3
POST ID # = 965593
VibePositiva Reputation: 10
Default

I did the same process using ISP v110 and now my mouse is working perfectly thanks for sharing this with us

@Goudada
Reply With Quote


  #20  
Old 08-25-2019, 08:06 AM
diziet diziet is offline
Registered User
diziet's PC Specs
 
Join Date: Apr 2019
Posts: 4
POST ID # = 1015646
diziet Reputation: 10
Default

Amazing, over a year later and corsair support just sent me this same 204 firmware file and bricked my mouse. If it wasn't for this thread I'd have had a dead mouse for a bank holiday weekend. Thank you so much for still having that google drive link active.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.