icedgrapejuice Posted December 16, 2019 Share Posted December 16, 2019 Hey everyone, I am receiving my 570x this week and I am having some trouble figuring out my fan configuration. I want to keep the 3 sp120s in the front I will be adding an h115i 280 with the included ml140s front mounted against the 3 sp120 and I would like to add 3 more ML120, two at the top and one in the back. I also have the corsair lightstrips and one lighting node pro. what would be the most appropriate way to wire this all? Thanks everyone for the help Link to comment Share on other sites More sharing options...
mrshrir Posted December 20, 2019 Share Posted December 20, 2019 you cant mix different fans,on the same controller and you want to have a total of 8, your best options is to to get a COMMANDER PRO, connect the 3 SP fans to the fan hub that comes with your case, and connect the other 5 ML fasns to the commander pro . the light led strips can be connected to the commander pro, and you can use the lnp with the original fan hub that will have the 3 120 sp fans, the lnp gives you control from the pc rather than from the buttons on the case . Link to comment Share on other sites More sharing options...
DevBiker Posted December 20, 2019 Share Posted December 20, 2019 Well, the 3 ML120's will also come with a Lighting Node Pro (NoPro) ... so you'll have two of them. That will be able to handle your lighting. The Commander Pro is optional but it will let you control fan speeds as well as RGB. Link to comment Share on other sites More sharing options...
Recommended Posts