AGuyNamedParis Posted August 31, 2019 Share Posted August 31, 2019 Hi all, I've been fighting this issue for a few months now, but nothing seems to be working for me. My Dark Core RGB refuses to stay on, and will turn off if I don't touch or move it for 60 seconds. Here's everything I've done to try and fix the problem: Update Mouse firmware Update iCUE Reinstall iCUE Wipe Software Profiles and remake them Wipe all profiles, allow new hardware profiles to load, and use those Lower dongle polling rate (doesn't work, immediately deselects upon leaving the settings tab) Clean Registry Update USB controllers (currently running best drivers) Uninstall and delete Corsair Drivers, allow them to reinstall Acquired new Dark Core mouse Nothing has worked. When I got a new mouse, it worked for a couple of days, then I shut down my PC. When I turned it back on, it was back to square one. I am completely at a loss at what to do next, and support just wants to send me a new mouse, despite that clearly not working. This is the 3rd Dark Core I've gotten, so either I'm very unlucky or there is some software conflict I am not aware of. Any help is appreciated. Thanks. Link to comment Share on other sites More sharing options...
Apophis3 Posted August 31, 2019 Share Posted August 31, 2019 I use just hardware profiles, and I got it fixed here. Make sure the HW profile you use is the first one in the iCUE listing. Of course, don't forget to save the hardware profile after changing the timer setting to the mouse. Link to comment Share on other sites More sharing options...
Recommended Posts