![]() |
|
Register | Forum Rules | Support Ticket System | Members List | Social Groups | Edit System Specs | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
#1
|
|||
|
|||
![]()
[i have a Corsair Graphite 780T white case] [ WILL the LL120 RGB 120mm Dual Light Loop RGB LED PWM Fan — 3 Fan Pack with Lighting Node PRO...] [fit on the top of the case underneath the filter or will i have to get the..] [LL140 RGB 140mm Dual Light Loop RGB LED PWM Fan — 2 Fan Pack with Lighting Node PRO..] [i will add a attchment so you can see what i mean..]
Last edited by snowdog2001; 05-04-2018 at 05:46 AM. |
#2
|
|||
|
|||
![]()
Are you trying for 3x120 across the top? Or was the plan 2x120 + 1x120 rear.
|
#3
|
|||
|
|||
![]()
the plan was to put 3x120 across top but i thourght they might not fit so what i was saying was if the 3x120 do not fit will the 2x140 fit? but the one i would like to do is the 2x140 but will they fit on the top
Last edited by snowdog2001; 05-04-2018 at 06:00 AM. |
#4
|
|||
|
|||
![]()
2x140 certainly fits and would work with a 280mm radiator, the most common size for that case. The 3x120 should fit too, but there is usually a catch (like removing the 5.25 drive) and it I would prefer to wait for a case owner to verify or elaborate.
|
#5
|
|||
|
|||
![]()
thank you for you help i was just making sure they would fit btw just thinking the fans in the front if i took them off could i fit them to the top and the 2x140 at the front?
|
#6
|
|||
|
|||
![]()
Front is 2x140 easy or again, 3x120 does fit with some drive removal. I might try to keep the total rub fan total to 6 for the case. The 7th will require a second powered lighting hub and is just one more thing to wire, unless you really want it.
|
![]() |
Tags |
780t, case, fan, light, rgb |
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|