The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 09-02-2017, 12:07 AM
jwatte jwatte is offline
Registered User
 
Join Date: Sep 2017
Posts: 2
POST ID # = 918637
jwatte Reputation: 10
Question H115i cooler for Threadripper not detected on USB bus with MSI X399 Carbon motherboar

I am using a Threadripper 1950X CPU on a MSI X399 Carbon motherboard (which I wouldn't recommend -- one of the RAM banks appears dead no matter how much I move sticks around.)

I am cooling with a Corsair H115i.

The H115i is connected to one of the two available motherboard USB-2 headers. The other header is connected to the RM850i power supply I also use.

When I run "lsusb" I find the power supply, but I do not find the cooler on the USB bus:

Code:
jwatte@ripper:/usr/local/src/OpenCorsairLink$ lsusb
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 003: ID 258a:1007   # no-name mouse
Bus 007 Device 002: ID 1a2c:2e43 China Resource Semico Co., Ltd  # no-name keyboard
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 045e:0800 Microsoft Corp.  # wireless keyboard
Bus 001 Device 002: ID 1b1c:1c0c Corsair  # RM850i power supply
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Unplugging and re-plugging the cooler mini-USB cable while running "usbadm monitor" does not show any changes in detection on the USB bus.

What can be causing this?
Reply With Quote


  #2  
Old 09-02-2017, 12:07 PM
jwatte jwatte is offline
Registered User
 
Join Date: Sep 2017
Posts: 2
POST ID # = 918692
jwatte Reputation: 10
Default

I swapped the two headers on the motherboard between PSU and pump, and then both devices showed up. I'm willing to believe I had somehow not seated the pump USB cable correctly, and this fixed it.

Code:
jwatte@ripper:/usr/local/src/OpenCorsairLink$ sudo ./OpenCorsairLink.elf --device 0
Dev=0, CorsairLink Device Found: H115i!
Dev=1, CorsairLink Device Found: RM850i!

Vendor: Corsair
Product: H115i
Firmware: 2.8.0.0
Temperature 0: 31.10
Fan Speed 0: 840
Pump Speed: 2910
jwatte@ripper:/usr/local/src/OpenCorsairLink$ sudo ./OpenCorsairLink.elf --device 1
Dev=0, CorsairLink Device Found: H115i!
Dev=1, CorsairLink Device Found: RM850i!

Vendor: CORSAIR
Product: RM850i
Firmware: NA
Temperature 0: 44.50 C
Temperature 1: 36.50 C
Powered: 242648 (2d.  19h)
Uptime: 1448 (0d.  0h)
Supply Voltage: 115.00
Total Watts: 156.00
Output 12v:
	Voltage 12.06
	Amps 11.00
	Watts 132.00
Output 5v:
	Voltage  5.06
	Amps  5.00
	Watts 25.00
Output 3.3v:
	Voltage  3.34
	Amps  1.12
	Watts  4.00
jwatte@ripper:/usr/local/src/OpenCorsairLink$
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.