ecoo997 Posted March 11, 2016 Share Posted March 11, 2016 Originally a BitFenix Phenom M Case this lunchbox inspired PC combines both new and the old with a beaten up lunchbox scavenged from the wastelands and shiny new Vault Tec hardware! I customized some Corsair Vengeance RAM to look extra Vault Tec like. http://www.technologyandgaming.com.au/wp-content/uploads/2016/03/Fallout_Lunchbox_022-1024x576.jpg The side panel was hinged from the bottom so that it would hinge just like the lunchbox provided from the collector’s edition of Fallout 3 (was used as reference) A latch was placed at the top at the door to hold it closed. http://www.technologyandgaming.com.au/wp-content/uploads/2016/03/Fallout_Lunchbox_021-1024x527.jpg A giant hole was then blown into the side panel to add to the damaged look but to also create a window to the shininess on the inside. A Perspex barrier was placed behind the hole to prevent a large amount of dust from getting through. http://www.technologyandgaming.com.au/wp-content/uploads/2016/03/Fallout_Lunchbox_019-1024x820.jpg Nuka Cola caps were used as the power and reset buttons and a handle was built in and reinforced in the top so it can hold the weight of the filled case. http://www.technologyandgaming.com.au/wp-content/uploads/2016/03/Fallout_Lunchbox_009-1024x867.jpg A Pip-Boy was built with an LCD and a programmed Arduino to display the ‘Please Stand By’ image as well as several other images directly related to the Pip-Boy. http://www.technologyandgaming.com.au/wp-content/uploads/2016/03/Fallout_Lunchbox_005-1024x968.jpg The inside is obviously themed in the Vault Tec blue and yellow all hit with a gloss clear coating to make it as shiny as physically possible. http://www.technologyandgaming.com.au/wp-content/uploads/2016/03/Fallout_Lunchbox_017-683x1024.jpg http://www.technologyandgaming.com.au/wp-content/uploads/2016/03/Fallout_Lunchbox_016-683x1024.jpg http://www.technologyandgaming.com.au/wp-content/uploads/2016/03/Fallout_Lunchbox_013-1024x828.jpg The specs of our wasteland ready PC are as follows: Intel i7 4790 Corsair Vengeance 16gb 1600Mhz Gigabyte H97m Corsair Neutron XT 240GB WD Black 2TB EVGA 960 SC Corsair AX860 Phanteks PH-TC12LS Low Profile CPU Cooler To see more images and the other MODS ive completed see here: https://www.facebook.com/TAGtechnologyandgaming/ Or check out my website! http://www.technologyandgaming.com.au/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.