will_s Posted March 4, 2020 Share Posted March 4, 2020 Putting a loop in other PC and only hrydro x part will be the GPU block because I prefer them Will be using just the Hydro GPU and was wondering how to connect it to the Commander pro? The Pro will only be used as a fan hub ( no RGB on fans ) and basically only RGB will be EK CPU and Distro Block as well as hydro x GPU I would assume you would need some sort of extension cable. I am not up to scratch on RGB at all Link to comment Share on other sites More sharing options...
Corsair Employee Corsair GregX Posted March 4, 2020 Corsair Employee Share Posted March 4, 2020 You can connect the RGB cable from the XG7 GPU water block directly to the RGB channel on your Commander PRO. At 1:14 you can see the RGB part. [ame= ] [/ame] How to setup lighting control in iCUE: [ame= ] [/ame] Link to comment Share on other sites More sharing options...
Zotty Posted March 4, 2020 Share Posted March 4, 2020 and for a visual reference.... Red line is RGB Control.. http://i.imgur.com/E62hA1zl.png as you can see. in the Corsair Hydro X eco system the RGB is daisy chained. the GPU Block has 2 cables.. an in and an out.. you would connect the in cable to one of the RGB Channels on the Commander Pro.. unfortunately corsair does not sell the RGB extension cables. you get 4 with Corsairs Pro Lighting strips though. another option is Pirate Dog Tech which does after market cables.. Pirate Dog Tech Store you would want the Corsair RGB LED Strip Extension Cable Link to comment Share on other sites More sharing options...
Recommended Posts