The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Hydro X Custom Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 10-07-2019, 03:26 AM
tomcoleman tomcoleman is offline
Registered User
tomcoleman's PC Specs
 
Join Date: Aug 2019
Posts: 63
POST ID # = 1020499
tomcoleman Reputation: 10
Default Hydro X Series XC7 XC9 improved temperatures

So i decided to clean my Hydro X Series XC7 CPU block, in doing so i increased my cooling temperatures

I cleaned off the pre applied paste and switched to

Thermal Grizzly Kryonaut 12.5 W / m · K 1 g thermal grease (-200 to 350 ° C)

After undoing the block and resting my temps dropped around 8c on average (5-10c total)

Im running a Ryzen 3900X as my CPU

Normal operational temps at idle was around 35-45cm, im now seeing 25-35c

You need a T6 Screwdriver to undo the screws, took me all of about 5mins todo this, i applied quite a decent amount of new paste. Large pea with some small peas around the gaps







Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.