T1murik Posted May 26, 2019 Share Posted May 26, 2019 Hello. My simple question : Can i use with this Psu pins > for two cables for my morherboard Cpu plugs (2x 4+4pin EPS 12v) and leave one 8pin for GPU ? As i can see on the psu itself ,it says: ,,6+2 pin PCIE & 4+4 pin CPU”. Thanks! Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted May 28, 2019 Corsair Employee Share Posted May 28, 2019 The connectors on the PSU listed as 6+2 PCIE & 4+4 CPU are where you plug your PCIe cables and your CPU cables into. They are two completely different cables but use the same connector on the PSU end. Link to comment Share on other sites More sharing options...
T1murik Posted May 28, 2019 Author Share Posted May 28, 2019 (edited) cables are different-i do know that, But question is not about it! Question: can i connect to SF600 -Two cables for my Cpu (4+4 cables) and One input- leave for Gpu? Edited May 28, 2019 by T1murik Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted May 29, 2019 Corsair Employee Share Posted May 29, 2019 You should be able to so long as you stay within the limits of the PSU itself. Link to comment Share on other sites More sharing options...
Recommended Posts